Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- e -

• E : pprz_geodetic_utm.h
• E25_IN_BUFFER_LEN : eeprom25AA256.h
• E25_OUT_BUFFER_LEN : eeprom25AA256.h
• E_CS0 : board.h
• E_CS0_PORT : board.h
• E_CS1 : board.h
• E_CS1_PORT : board.h
• E_CS2 : board.h
• E_CS2_PORT : board.h
• E_CS3 : board.h
• E_CS3_PORT : board.h
• E_ID_H_SPEED : e_identification_fr.h
• E_ID_HAGL : e_identification_fr.h
• E_ID_HMSL : e_identification_fr.h
• E_ID_ID_ANSI_UAS : e_identification_fr.h
• E_ID_ID_FR : e_identification_fr.h
• E_ID_LAT : e_identification_fr.h
• E_ID_LAT_TO : e_identification_fr.h
• E_ID_LON : e_identification_fr.h
• E_ID_LON_TO : e_identification_fr.h
• E_ID_PROTOCOL_VERSION : e_identification_fr.h
• E_ID_ROUTE : e_identification_fr.h
• e_id_type : e_identification_fr.h
• e_identification_fr_init() : e_identification_fr.c , e_identification_fr.h
• e_identification_fr_periodic() : e_identification_fr.c , e_identification_fr.h
• E_Identification_Fr_Start : e_identification_fr.h
• E_Identification_Fr_Stop : e_identification_fr.h
• E_MISO : board.h
• E_MISO_PORT : board.h
• E_MOSI : board.h
• E_MOSI_PORT : board.h
• E_RX1 : board.h
• E_RX1_PORT : board.h
• E_RX2 : board.h
• E_RX2_PORT : board.h
• E_SCK : board.h
• E_SCK_PORT : board.h
• E_SCL : board.h
• E_SCL_PORT : board.h
• E_SDA : board.h
• E_SDA_PORT : board.h
• E_TX1 : board.h
• E_TX1_PORT : board.h
• E_TX2 : board.h
• E_TX2_PORT : board.h
• eas_from_dynamic_pressure() : air_data.c , air_data.h
• ECEF_BFP_OF_REAL : pprz_geodetic_int.h
• ECEF_DOUBLE_OF_BFP : pprz_geodetic_int.h
• ECEF_FLOAT_OF_BFP : pprz_geodetic_int.h
• ecef_of_enu_point_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• ecef_of_enu_point_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• ecef_of_enu_point_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_enu_pos_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_enu_vect_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• ecef_of_enu_vect_f() : pprz_geodetic_float.h , pprz_geodetic_float.c
• ecef_of_enu_vect_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_lla_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• ecef_of_lla_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• ecef_of_lla_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_ned_point_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• ecef_of_ned_point_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• ecef_of_ned_point_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_ned_pos_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ecef_of_ned_vect_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• ecef_of_ned_vect_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• ecef_of_ned_vect_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ed25519_signature : gec.h
• Edge : nav_flower.c
• EdgeCurrentX : nav_flower.c
• EdgeCurrentY : nav_flower.c
• EdgeMaxY : nav_survey_poly_osam.c , nav_survey_poly_rotorcraft.c
• EdgeMinY : nav_survey_poly_osam.c , nav_survey_poly_rotorcraft.c
• Edges : nav_survey_poly_osam.c , nav_survey_poly_rotorcraft.c
• eeprom25AA256_event() : eeprom25AA256.c , eeprom25AA256.h
• eeprom25AA256_init() : eeprom25AA256.c , eeprom25AA256.h
• eeprom25AA256_read() : eeprom25AA256.c , eeprom25AA256.h
• Eeprom25AA256InstructionSet : eeprom25AA256.c
• EEPROM_RDSR : eeprom25AA256.c
• EEPROM_READ : eeprom25AA256.c
• EEPROM_WRDI : eeprom25AA256.c
• EEPROM_WREN : eeprom25AA256.c
• EEPROM_WRITE : eeprom25AA256.c
• EEPROM_WRSR : eeprom25AA256.c
• eigen_assert : ins_mekf_wind.cpp
• Eight : nav.h
• eight_status : nav.c
• ekf : ins_ekf2.cpp
• ekf2 : ins_ekf2.cpp
• ekf2_params : ins_ekf2.cpp , ins_ekf2.h
• ekf_input : discrete_ekf_no_north.c
• EKF_L : discrete_ekf_no_north.h
• EKF_M : discrete_ekf.h , discrete_ekf_no_north.h
• EKF_N : discrete_ekf.h , discrete_ekf_no_north.h
• ekf_params : ins_ekf2.cpp
• EKF_RANGE_DIM : ekf_range.h
• ekf_range_get_pos() : ekf_range.c , ekf_range.h
• ekf_range_get_speed() : ekf_range.c , ekf_range.h
• ekf_range_get_state() : ekf_range.c , ekf_range.h
• ekf_range_init() : ekf_range.c , ekf_range.h
• ekf_range_predict() : ekf_range.c , ekf_range.h
• ekf_range_set_state() : ekf_range.c , ekf_range.h
• ekf_range_update_dist() : ekf_range.c , ekf_range.h
• ekf_range_update_noise() : ekf_range.c , ekf_range.h
• ekf_range_update_speed() : ekf_range.c , ekf_range.h
• ekf_rl : relative_localization_filter.c
• ekf_statein : discrete_ekf_no_north.c
• elc_d_gain_start : optical_flow_landing.c
• elc_i_gain_start : optical_flow_landing.c
• elc_p_gain_start : optical_flow_landing.c
• elc_phase : optical_flow_landing.c
• elc_time_start : optical_flow_landing.c
• electrical : electrical.c , electrical.h
• electrical_ardrone2_setup() : bat_voltage_ardrone2.c
• electrical_init() : electrical.c , electrical.h
• electrical_periodic() : electrical.c , electrical.h
• ELECTRICAL_PERIODIC_FREQ : electrical.c
• electrical_tid : main_fbw.c , main_ap.c , main_fbw.c , main_ap.c
• ELLIPSE : gvf.h
• EM7DEG_OF_DEG : pprz_geodetic_int.h
• EM7DEG_OF_RAD : pprz_geodetic_int.h
• EM7RAD_OF_RAD : pprz_geodetic_int.h
• EN_COMP : board.h
• EnableFall : trigger_ext_hw.h
• enableFIQ() : armVIC.c , armVIC.h
• EnableInt : trigger_ext_hw.h
• enableIRQ() : armVIC.c , armVIC.h
• EnableRise : trigger_ext_hw.h
• encodeHighBytes() : decawave_anchorless_communication.c
• end_log() : high_speed_logger_direct_memory.c , high_speed_logger_direct_memory.h
• END_OF_MEMORY_THRESHOLD : high_speed_logger_direct_memory.c
• Entry : nav_survey_poly_osam.c , nav_survey_poly_rotorcraft.c
• ENTRY : nav_survey_polygon.h
• EntryRadius : nav_survey_poly_osam.c , nav_survey_poly_rotorcraft.c
• ENU_BFP_OF_REAL : pprz_geodetic_int.h
• ENU_FLOAT_OF_BFP : pprz_geodetic_int.h
• enu_of_ecef_point_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• enu_of_ecef_point_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• enu_of_ecef_point_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• enu_of_ecef_pos_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• enu_of_ecef_vect_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• enu_of_ecef_vect_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• enu_of_ecef_vect_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• enu_of_lla_point_d() : pprz_geodetic_double.c , pprz_geodetic_double.h
• enu_of_lla_point_f() : pprz_geodetic_float.c , pprz_geodetic_float.h
• enu_of_lla_point_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• enu_of_lla_pos_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• enu_of_lla_vect_i() : pprz_geodetic_int.c , pprz_geodetic_int.h
• ENU_OF_TO_NED : pprz_geodetic.h
• ENU_OF_UTM_DIFF : pprz_geodetic.h
• EOF : usb_ser_hw.c
• ep1_in_state : usb_msd.c
• ep1_out_state : usb_msd.c
• ep_data_config : usb_msd.c
• epsilon : obstacle_avoidance.c , obstacle_avoidance.h
• ERASE_MEMORY_AT_START : high_speed_logger_direct_memory.c
• ERR : nav_survey_polygon.h
• err_vx : guidance_OA.c
• err_vy : guidance_OA.c
• error_cb : tlsf_malloc_arch.c
• ERROR_NONE : gec.h
• error_output() : ahrs_float_invariant.c , ins_float_invariant.c
• esc32 : esc32.c , esc32.h
• ESC32_BUF_IN_LEN : esc32.c
• ESC32_BUF_OUT_LEN : esc32.c
• ESC32_CAN_CMD_ARM : actuators_esc32.h
• ESC32_CAN_CMD_BEEP : actuators_esc32.h
• ESC32_CAN_CMD_CFG_DEFAULT : actuators_esc32.h
• ESC32_CAN_CMD_CFG_READ : actuators_esc32.h
• ESC32_CAN_CMD_CFG_WRITE : actuators_esc32.h
• ESC32_CAN_CMD_DISARM : actuators_esc32.h
• ESC32_CAN_CMD_OFF : actuators_esc32.h
• ESC32_CAN_CMD_ON : actuators_esc32.h
• ESC32_CAN_CMD_POS : actuators_esc32.h
• ESC32_CAN_CMD_RESET : actuators_esc32.h
• ESC32_CAN_CMD_RPM : actuators_esc32.h
• ESC32_CAN_CMD_SETPOINT10 : actuators_esc32.h
• ESC32_CAN_CMD_SETPOINT12 : actuators_esc32.h
• ESC32_CAN_CMD_SETPOINT16 : actuators_esc32.h
• ESC32_CAN_CMD_START : actuators_esc32.h
• ESC32_CAN_CMD_STOP : actuators_esc32.h
• ESC32_CAN_CMD_STREAM : actuators_esc32.h
• ESC32_CAN_CMD_TELEM_RATE : actuators_esc32.h
• ESC32_CAN_CMD_TELEM_VALUE : actuators_esc32.h
• ESC32_CAN_CMD_USER_DEFINED : actuators_esc32.h
• ESC32_CAN_DATA_GROUP : actuators_esc32.h
• ESC32_CAN_DATA_ID : actuators_esc32.h
• ESC32_CAN_DATA_INPUT_MODE : actuators_esc32.h
• ESC32_CAN_DATA_PARAM_ID : actuators_esc32.h
• ESC32_CAN_DATA_PARAM_NAME1 : actuators_esc32.h
• ESC32_CAN_DATA_PARAM_NAME2 : actuators_esc32.h
• ESC32_CAN_DATA_RUN_MODE : actuators_esc32.h
• ESC32_CAN_DATA_STATE : actuators_esc32.h
• ESC32_CAN_DATA_TELEM : actuators_esc32.h
• ESC32_CAN_DATA_TYPE : actuators_esc32.h
• ESC32_CAN_DATA_VALUE : actuators_esc32.h
• ESC32_CAN_DATA_VERSION : actuators_esc32.h
• ESC32_CAN_DOC_MASK : actuators_esc32.h
• ESC32_CAN_FID_ACK : actuators_esc32.h
• ESC32_CAN_FID_CMD : actuators_esc32.h
• ESC32_CAN_FID_ERROR : actuators_esc32.h
• ESC32_CAN_FID_GET : actuators_esc32.h
• ESC32_CAN_FID_GRANT_ADDR : actuators_esc32.h
• ESC32_CAN_FID_MASK : actuators_esc32.h
• ESC32_CAN_FID_NACK : actuators_esc32.h
• ESC32_CAN_FID_PING : actuators_esc32.h
• ESC32_CAN_FID_REPLY : actuators_esc32.h
• ESC32_CAN_FID_REQ_ADDR : actuators_esc32.h
• ESC32_CAN_FID_RESET_BUS : actuators_esc32.h
• ESC32_CAN_FID_SET : actuators_esc32.h
• ESC32_CAN_FID_TELEM : actuators_esc32.h
• ESC32_CAN_LCC_EXCEPTION : actuators_esc32.h
• ESC32_CAN_LCC_HIGH : actuators_esc32.h
• ESC32_CAN_LCC_INFO : actuators_esc32.h
• ESC32_CAN_LCC_MASK : actuators_esc32.h
• ESC32_CAN_LCC_NORMAL : actuators_esc32.h
• ESC32_CAN_SEQ_MASK : actuators_esc32.h
• ESC32_CAN_SID_MASK : actuators_esc32.h
• ESC32_CAN_TELEM_AMPS : actuators_esc32.h
• ESC32_CAN_TELEM_ERRORS : actuators_esc32.h
• ESC32_CAN_TELEM_NONE : actuators_esc32.h
• ESC32_CAN_TELEM_NUM : actuators_esc32.h
• ESC32_CAN_TELEM_RPM : actuators_esc32.h
• ESC32_CAN_TELEM_STATE : actuators_esc32.h
• ESC32_CAN_TELEM_STATUS : actuators_esc32.h
• ESC32_CAN_TELEM_TEMP : actuators_esc32.h
• ESC32_CAN_TELEM_VALUE : actuators_esc32.h
• ESC32_CAN_TELEM_VIN : actuators_esc32.h
• ESC32_CAN_TID_MASK : actuators_esc32.h
• ESC32_CAN_TT_GROUP : actuators_esc32.h
• ESC32_CAN_TT_MASK : actuators_esc32.h
• ESC32_CAN_TT_NODE : actuators_esc32.h
• ESC32_CAN_TYPE_ESC : actuators_esc32.h
• ESC32_CAN_TYPE_HUB : actuators_esc32.h
• ESC32_CAN_TYPE_NUM : actuators_esc32.h
• ESC32_CAN_TYPE_OSD : actuators_esc32.h
• ESC32_CAN_TYPE_SENSOR : actuators_esc32.h
• ESC32_CAN_TYPE_SERVO : actuators_esc32.h
• ESC32_CAN_TYPE_SWITCH : actuators_esc32.h
• ESC32_CAN_TYPE_UART : actuators_esc32.h
• esc32_compute_ck() : esc32.c
• ESC32_config_cmd : actuators_esc32.h
• ESC32_CONFIG_CMD_BEEP : actuators_esc32.h
• ESC32_CONFIG_CMD_DIR : actuators_esc32.h
• ESC32_CONFIG_CMD_IDLE : actuators_esc32.h
• ESC32_CONFIG_CMD_TURN : actuators_esc32.h
• ESC32_esc_status : actuators_esc32.h
• esc32_event() : esc32.c , esc32.h
• esc32_filter_data() : esc32.c
• esc32_get_float() : esc32.c
• esc32_init() : esc32.c , esc32.h
• esc32_init_ck() : esc32.c
• esc32_msg_send() : esc32.c
• ESC32_PARAMS_LEN : esc32.c
• esc32_parse_msg() : esc32.c
• esc32_periodic() : esc32.c , esc32.h
• esc32_priv : esc32.c
• esc32_put_char() : esc32.c
• esc32_put_float() : esc32.c
• esc32_put_short() : esc32.c
• ESC32_RESPONSE_CNT : actuators_esc32.h
• esc32_send() : esc32.c
• esc32_send_command() : esc32.c
• ESC32_status : actuators_esc32.h
• ESC32_STATUS_ESC_FREE : actuators_esc32.h
• ESC32_STATUS_ESC_INIT : actuators_esc32.h
• ESC32_STATUS_ESC_RDY : actuators_esc32.h
• ESC32_STATUS_INIT : actuators_esc32.h
• ESC32_STATUS_MELODY : actuators_esc32.h
• ESC32_STATUS_RUNNING : actuators_esc32.h
• ESC32_STATUS_UNARMED : actuators_esc32.h
• ESC32_TELEMETRY_RATE : esc32.c
• ESC_ID : esc32.h
• escape_flag : obstacle_avoidance.c
• ESCS_DATA_FLIPBIT : actuators_xvert.h
• ESCS_DATA_MYSTERYBIT : actuators_xvert.h
• ESCS_PORT : actuators_xvert.c
• ESCS_START_BYTE : actuators_xvert.h
• estimation_input_lowpass_filters : stabilization_indi.c
• estimation_output_lowpass_filters : stabilization_indi.c
• estimation_rate_d : stabilization_indi.c
• estimation_rate_dd : stabilization_indi.c
• EULERS_ADD : pprz_algebra.h
• EULERS_ASSIGN : pprz_algebra.h
• EULERS_BFP_OF_REAL : pprz_algebra.h
• EULERS_BOUND_CUBE : pprz_algebra.h
• EULERS_COPY : pprz_algebra.h
• EULERS_DIFF : pprz_algebra.h
• EULERS_FLOAT_OF_BFP : pprz_algebra.h
• EULERS_SDIV : pprz_algebra.h
• EULERS_SMUL : pprz_algebra.h
• EULERS_SUB : pprz_algebra.h
• ev : rssi.c
• EvaluateLineForX() : nav_survey_poly_rotorcraft.c , nav_survey_poly_osam.c
• event_i2c_abuse_test() : i2c_abuse_test.h , i2c_abuse_test.c
• event_sysmon() : sys_mon.c , sys_mon.h , rtos_mon.c
• event_task_ap() : main_ap.c , main_ap.h
• event_task_fbw() : main_fbw.c , main_fbw.h
• event_timer : sys_mon.c
• event_usb_serial() : usb_serial_stm32.h , usb_serial_stm32_example1.c , usb_serial_stm32_example2.c
• EVT_BOT_RESET : usb_msd.h
• EVT_SCSI_PROC_INQ : usb_msd.h
• EVT_SCSI_REQ_READ_CAP10 : usb_msd.h
• EVT_SCSI_REQ_READ_FMT_CAP : usb_msd.h
• EVT_SCSI_REQ_SEND_DIAGNOSTIC : usb_msd.h
• EVT_SCSI_REQ_SENSE10 : usb_msd.h
• EVT_SCSI_REQ_SENSE6 : usb_msd.h
• EVT_SCSI_REQ_TEST_UNIT_READY : usb_msd.h
• EVT_SEM_RELEASED : usb_msd.h
• EVT_SEM_TAKEN : usb_msd.h
• EVT_USB_CONFIGURED : usb_msd.h
• EVT_USB_RESET : usb_msd.h
• EVT_WAIT_FOR_COMMAND_BLOCK : usb_msd.h
• Ex : trilateration.c
• exception_flag : navigation.h , navigation.c
• exclude_bottom : detect_gate.c , detect_gate.h
• exclude_top : detect_gate.c , detect_gate.h
• EXHAUSTIVE_FAST : opticflow_calculator.c
• exif_header : exif_module.c
• exif_header_len : exif_module.c
• EXPAND_AS_ENUM : libisp.h
• EXPAND_AS_FUNCTION : libisp.c
• EXPAND_AS_PROTOTYPE : libisp.h
• expected_ack : gsm.c
• EXT_CLK : cjmcu.h , olimex_stm32-h103.h , cc3d.h , naze32_rev4.h , naze32_rev5.h , lisa_mx_common.h , px4fmu_2.4.h , lisa_m_1.0.h , krooz_sd.h , elle0_common.h , lisa_m_2.1.h , apogee_1.0.h , lisa_l_1.0.h , lisa_m_2.0.h , lia_1.1.h , opa_ftd_1.0.h , navstik_1.0.h , lisa_s_1.0.h , stm32f4_discovery.h , px4io_2.4.h , openpilot_revo_1.0.h , opa_ap_1.0.h , openpilot_revo_nano.h , px4fmu_4.0.h , px4fmu_1.7.h
• EXT_COEFF1 : pprz_geodetic_wmm2020.h
• EXT_COEFF2 : pprz_geodetic_wmm2020.h
• EXT_COEFF3 : pprz_geodetic_wmm2020.h
• EXT_SYNC : max7456_regs.h
• EXTERN : datalink.h
• external_device : decawave_anchorless_communication.c
• exti15_10_irq_handler() : imu_aspirin_arch.c
• exti15_10_isr() : imu_aspirin_arch.c
• exti2_irq_handler() : imu_aspirin_arch.c , sc18is600_arch.c
• exti2_isr() : max1168_arch.c , imu_aspirin_arch.c
• exti9_5_irq_handler() : hmc5843.c
• exti9_5_isr() : imu_krooz_sd_arch.c , ms2100_arch.c , hmc5843_arch.c
• EXTINT : LPC21xx.h
• EXTINT0_ISR() : max1168_arch.c
• EXTINT_ISR() : mag_micromag_fw_hw.c , ms2100_arch.c , baro_scp.c , max11040_hw.c
• EXTMODE : LPC21xx.h
• EXTPOLAR : LPC21xx.h
• extra_dl_buffer : extra_pprz_dl.c , extra_pprz_dl.h
• extra_dl_msg_available : extra_pprz_dl.c
• extra_pprz_dl_event() : extra_pprz_dl.h , extra_pprz_dl.c
• extra_pprz_dl_init() : extra_pprz_dl.c , extra_pprz_dl.h
• extra_pprz_dl_periodic() : extra_pprz_dl.h , extra_pprz_dl.c
• extra_pprz_tp : extra_pprz_dl.h , extra_pprz_dl.c
• EXTRA_PPRZ_UPDATE_DL : extra_pprz_dl.c
• extract_information_from_parameters() : linear_flow_fit.h , linear_flow_fit.c
• extractPhiGamma() : discrete_ekf_no_north.h , discrete_ekf_no_north.c
• extrapsh() : pprz_geodetic_wmm2020.c , pprz_geodetic_wmm2020.h
• EXTWAKE : LPC21xx.h
• Ey : trilateration.c
• Ez : trilateration.c
• EZCURRENT_ADDR : ezcurrent.c
• EZCURRENT_I2C_DEV : ezcurrent.c
• ezcurrent_i2c_trans : ezcurrent.c
• ezcurrent_init() : ezcurrent.h , ezcurrent.c
• ezcurrent_read_event() : ezcurrent.h , ezcurrent.c
• ezcurrent_read_periodic() : ezcurrent.c , ezcurrent.h