mag_lis3mdl.c

Go to the documentation of this file.

/*
 * Copyright (C) 2019 Gautier Hattenberger <gautier.hattenberger@enac.fr>
 *
 * This file is part of paparazzi.
 *
 * paparazzi is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * paparazzi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with paparazzi; see the file COPYING.  If not, see
 * <http://www.gnu.org/licenses/>.
 */
 
#include "modules/sensors/mag_lis3mdl.h"
#include "mcu_periph/uart.h"
#include "pprzlink/messages.h"
#include "subsystems/datalink/downlink.h"
#include "generated/airframe.h"
 
#ifndef LIS3MDL_CHAN_X
#define LIS3MDL_CHAN_X 0
#endif
#ifndef LIS3MDL_CHAN_Y
#define LIS3MDL_CHAN_Y 1
#endif
#ifndef LIS3MDL_CHAN_Z
#define LIS3MDL_CHAN_Z 2
#endif
#ifndef LIS3MDL_CHAN_X_SIGN
#define LIS3MDL_CHAN_X_SIGN +
#endif
#ifndef LIS3MDL_CHAN_Y_SIGN
#define LIS3MDL_CHAN_Y_SIGN +
#endif
#ifndef LIS3MDL_CHAN_Z_SIGN
#define LIS3MDL_CHAN_Z_SIGN +
#endif
 
#if MODULE_LIS3MDL_UPDATE_AHRS
#include "subsystems/imu.h"
#include "subsystems/abi.h"
 
#if defined LIS3MDL_MAG_TO_IMU_PHI && defined LIS3MDL_MAG_TO_IMU_THETA && defined LIS3MDL_MAG_TO_IMU_PSI
#define USE_MAG_TO_IMU 1
static struct Int32RMat mag_to_imu; 
#else
#define USE_MAG_TO_IMU 0
#endif
#endif
 
struct Lis3mdl mag_lis3mdl;
 
void mag_lis3mdl_module_init(void)
{
  lis3mdl_init(&mag_lis3mdl, &(MAG_LIS3MDL_I2C_DEV), LIS3MDL_ADDR1,
     LIS3MDL_DATA_RATE_80_HZ,
     LIS3MDL_SCALE_4_GAUSS,
     LIS3MDL_MODE_CONTINUOUS,
     LIS3MDL_PERFORMANCE_ULTRA_HIGH);
 
#if MODULE_LIS3MDL_UPDATE_AHRS && USE_MAG_TO_IMU
  struct Int32Eulers mag_to_imu_eulers = {
    ANGLE_BFP_OF_REAL(LIS3MDL_MAG_TO_IMU_PHI),
    ANGLE_BFP_OF_REAL(LIS3MDL_MAG_TO_IMU_THETA),
    ANGLE_BFP_OF_REAL(LIS3MDL_MAG_TO_IMU_PSI)
  };
  int32_rmat_of_eulers(&mag_to_imu, &mag_to_imu_eulers);
#endif
}
 
void mag_lis3mdl_module_periodic(void)
{
  lis3mdl_periodic(&mag_lis3mdl);
}
 
void mag_lis3mdl_module_event(void)
{
  lis3mdl_event(&mag_lis3mdl);
 
  if (mag_lis3mdl.data_available) {
#if MODULE_LIS3MDL_UPDATE_AHRS
    // current timestamp
    uint32_t now_ts = get_sys_time_usec();
 
    // set channel order
    struct Int32Vect3 mag = {
      LIS3MDL_CHAN_X_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_X]),
      LIS3MDL_CHAN_Y_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_Y]),
      LIS3MDL_CHAN_Z_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_Z])
    };
    // only rotate if needed
#if USE_MAG_TO_IMU
    struct Int32Vect3 imu_mag;
    // rotate data from mag frame to imu frame
    int32_rmat_vmult(&imu_mag, &mag_to_imu, &mag);
    // unscaled vector
    VECT3_COPY(imu.mag_unscaled, imu_mag);
#else
    // unscaled vector
    VECT3_COPY(imu.mag_unscaled, mag);
#endif
    // scale vector
    imu_scale_mag(&imu);
 
    AbiSendMsgIMU_MAG_INT32(MAG_LIS3MDL_SENDER_ID, now_ts, &imu.mag);
#endif
#if MODULE_LIS3MDL_SYNC_SEND
    mag_lis3mdl_report();
#endif
#if MODULE_LIS3MDL_UPDATE_AHRS ||  MODULE_LIS3MDL_SYNC_SEND
    mag_lis3mdl.data_available = false;
#endif
  }
}
 
void mag_lis3mdl_report(void)
{
  struct Int32Vect3 mag = {
    LIS3MDL_CHAN_X_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_X]),
    LIS3MDL_CHAN_Y_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_Y]),
    LIS3MDL_CHAN_Z_SIGN(int32_t)(mag_lis3mdl.data.value[LIS3MDL_CHAN_Z])
  };
  DOWNLINK_SEND_IMU_MAG_RAW(DefaultChannel, DefaultDevice, &mag.x, &mag.y, &mag.z);
}