#include "std.h"

Include dependency graph for nav_survey_poly_rotorcraft.h:

This graph shows which files directly or indirectly include this file:

Functions
bool_t	nav_survey_poly_setup (uint8_t FirstWP, uint8_t Size, float Sweep, float Orientation)
	Setup polygon survey. More...

bool_t	nav_survey_poly_setup_towards (uint8_t FirstWP, uint8_t Size, float Sweep, int SecondWP)
	Setup "dynamic" polygon survey with sweep orientation towards a waypoint. More...

bool_t	nav_survey_poly_run (void)
	Run polygon survey. More...

Variables
uint8_t	Poly_Size

float	Poly_Distance

uint16_t	PolySurveySweepNum

uint16_t	PolySurveySweepBackNum

Function Documentation

bool_t nav_survey_poly_run ( void )

Run polygon survey.

Definition at line 316 of file nav_survey_poly_rotorcraft.c.

References CSurveyStatus, dc_distance_interval, dc_send_command(), DC_SHOOT, dSweep, EdgeMaxY, EdgeMinY, Edges, Entry, ENU_BFP_OF_REAL, EvaluateLineForX(), FALSE, horizontal_mode, HORIZONTAL_MODE_ROUTE, Init, LINE_START_FUNCTION, LINE_STOP_FUNCTION, MaxY, nav_approaching_from(), nav_init_stage(), nav_route(), navigation_target, PolySurveySweepNum, RotateAndTranslateToWorld(), SmallestCorner, stateGetPositionEnu_f(), survey_to_i, SurveyEntry, SurveyEntryWP, SurveyFromWP, SurveySize, SurveyTheta, SurveyToWP, Sweep, TRUE, Turn, VECT3_COPY, waypoints, Point2D::x, EnuCoor_f::x, Point2D::y, EnuCoor_f::y, and EnuCoor_f::z.

Here is the call graph for this function:

bool_t nav_survey_poly_setup	(	uint8_t	FirstWP,
		uint8_t	Size,
		float	Sweep,
		float	Orientation
	)

Setup polygon survey.

Parameters

FirstWP	first waypoint/corner of the polygon
Size	number of waypoints/corners used to define the polygon
Sweep	distance between scan lines
Orientation	angle of scan lines in degrees (CCW, east)

Definition at line 131 of file nav_survey_poly_rotorcraft.c.

References Line::b, CSurveyStatus, dSweep, EdgeMaxY, EdgeMinY, Edges, Entry, EvaluateLineForX(), FALSE, FindInterceptOfTwoLines(), Init, LINE_STOP_FUNCTION, Line::m, MaxFloat, MaxY, nav_set_heading_deg(), NavVerticalAltitudeMode, POLYSURVEY_ENTRY_DISTANCE, PolySurveySweepBackNum, PolySurveySweepNum, SmallestCorner, SurveyEntry, SurveyEntryWP, SurveyFromWP, SurveySize, SurveyTheta, SurveyToWP, TranslateAndRotateFromWorld(), TRUE, waypoints, point::x, Point2D::x, EnuCoor_f::x, point::y, Point2D::y, and EnuCoor_f::y.

Referenced by nav_survey_poly_setup_towards().

Here is the call graph for this function:

Here is the caller graph for this function:

bool_t nav_survey_poly_setup_towards	(	uint8_t	FirstWP,
		uint8_t	Size,
		float	Sweep,
		int	SecondWP
	)

Setup "dynamic" polygon survey with sweep orientation towards a waypoint.

Computes the sweep orientation angle from the line FirstWP-SecondWP. If you pass zero for Size and/or Sweep it will use the global Poly_Size and Poly_Sweep variables respectively (which can be changed via telemetry/settings).

Parameters

FirstWP	first waypoint/corner of the polygon
Size	number of waypoints/corners used to define the polygon, if zero uses Poly_Size
Sweep	distance between scan lines, if zero uses Poly_Distance
SecondWP	second waypoint towards which the sweep orientation is computed

Definition at line 69 of file nav_survey_poly_rotorcraft.c.

References nav_survey_poly_setup(), Poly_Distance, Poly_Size, waypoints, point::x, and point::y.

Here is the call graph for this function: