mpu60x0.h

Go to the documentation of this file.

/*
 * Copyright (C) 2013 Gautier Hattenberger
 *
 * This file is part of paparazzi.
 *
 * paparazzi is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * paparazzi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with paparazzi; see the file COPYING.  If not, write to
 * the Free Software Foundation, 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

#ifndef MPU60X0_H
#define MPU60X0_H

#include "std.h"

/* Include address and register definition */
#include "peripherals/mpu60x0_regs.h"

#define MPU60X0_DEFAULT_SMPLRT_DIV 0
#define MPU60X0_DEFAULT_FS_SEL MPU60X0_GYRO_RANGE_2000
#define MPU60X0_DEFAULT_AFS_SEL MPU60X0_ACCEL_RANGE_16G
#define MPU60X0_DEFAULT_DLPF_CFG MPU60X0_DLPF_42HZ
#define MPU60X0_DEFAULT_INT_CFG 1
#define MPU60X0_DEFAULT_CLK_SEL 1

enum Mpu60x0ConfStatus {
  MPU60X0_CONF_UNINIT,
  MPU60X0_CONF_RESET,
  MPU60X0_CONF_USER_RESET,
  MPU60X0_CONF_PWR,
  MPU60X0_CONF_SD,
  MPU60X0_CONF_DLPF,
  MPU60X0_CONF_GYRO,
  MPU60X0_CONF_ACCEL,
  MPU60X0_CONF_I2C_SLAVES,
  MPU60X0_CONF_INT_ENABLE,
  MPU60X0_CONF_DONE
};

typedef void (*Mpu60x0ConfigSet)(void *mpu, uint8_t _reg, uint8_t _val);

typedef bool_t (*Mpu60x0I2cSlaveConfigure)(Mpu60x0ConfigSet mpu_set, void *mpu);

struct Mpu60x0I2cSlave {
  Mpu60x0I2cSlaveConfigure configure;
};

struct Mpu60x0Config {
  uint8_t smplrt_div;                   
  enum Mpu60x0DLPF dlpf_cfg;            
  enum Mpu60x0GyroRanges gyro_range;    
  enum Mpu60x0AccelRanges accel_range;  
  bool_t drdy_int_enable;               
  uint8_t clk_sel;                      
  uint8_t nb_bytes;                     
  enum Mpu60x0ConfStatus init_status;   
  bool_t initialized;                   

  bool_t i2c_bypass;

  uint8_t nb_slaves;                    
  struct Mpu60x0I2cSlave slaves[5];     
  enum Mpu60x0MstClk i2c_mst_clk;       
  uint8_t i2c_mst_delay;                
};

extern void mpu60x0_set_default_config(struct Mpu60x0Config *c);

extern void mpu60x0_send_config(Mpu60x0ConfigSet mpu_set, void *mpu, struct Mpu60x0Config *config);

extern bool_t mpu60x0_configure_i2c_slaves(Mpu60x0ConfigSet mpu_set, void *mpu);

#endif // MPU60X0_H