Paparazzi UAS  v5.18.0_stable
Paparazzi is a free software Unmanned Aircraft System.
cv_opticflow module

Compute optical flow.

Made for Linux video Devices. Computes x and y velocity using optical flow and distance to ground (using sonar). Cannot define CAMERA2 without first defining CAMERA.

Example for airframe file

Add to your firmware section:

<module name="cv_opticflow"/>

Module configuration options

Airframe file section

  • section name: OPTICFLOW prefix: OPTICFLOW_
    • name AGL_ID value: ABI_BROADCAST
      Description: ABI receive id for ABI message (sonar measurement) (default: ABI_BROADCAST)
    • name SEND_ABI_ID value: 1
      Description: ABI sender id for opticflow messages (default: 1)
    • name CAMERA value: bottom_camera|front_camera
      Description: The V4L2 camera device that is used for the calculations
    • name DEROTATION_CORRECTION_FACTOR_X value: 1.0
      Description: Correction factor for derotation (in x direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)
    • name DEROTATION_CORRECTION_FACTOR_Y value: 1.0
      Description: Correction factor for derotation (in y direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)
    • name METHOD value: 0
      Description: Method used to calculate optical flow
    • name WINDOW_SIZE value: 10
      Description: Window size used for block matching (pixels)
    • name SEARCH_DISTANCE value: 10
      Description: Maximum search distance for blockmatching (pixels)
    • name SUBPIXEL_FACTOR value: 10
      Description: Amount of subpixels per pixel, used for more precise (subpixel) calculations of the flow
    • name RESOLUTION_FACTOR value: 1000
      Description: The resolution factor needed to calculate the divergence without floats
    • name DEROTATION value: 1
      Description: Derotation either turned on or off (depended on gyroscope measurements)
    • name MEDIAN_FILTER value: 0
      Description: A median filter on the resulting velocities to be turned on or off (last 5 measurements)
    • name FEATURE_MANAGEMENT value: 1
      Description: Whether to keep already tracked corners in memory for the next frame or re-detect new ones every time
    • name FPS value: 0
      Description: The (maximum) frequency to run the calculations at. If zero, it will max out at the camera frame rate
    • name TRACK_BACK value: TRUE
      Description: Whether flow vectors are tracked back to the previous image and only kept if they end up close to the original point.
    • name SHOW_FLOW value: TRUE
      Description: Whether to draw the flow vectors in the image.
    • name MAX_TRACK_CORNERS value: 25
      Description: The maximum amount of corners the Lucas Kanade algorithm is tracking between two frames
    • name MAX_ITERATIONS value: 10
      Description: Maximum number of iterations the Lucas Kanade algorithm should take
    • name THRESHOLD_VEC value: 2
      Description: Threshold in subpixels when the iterations of Lucas Kanade should stop
    • name CORNER_METHOD value: 1
      Description: Method used to look for corners, exhaustive FAST (0) or ACT-FAST (1).
    • name FAST9_ADAPTIVE value: TRUE
      Description: Whether we should use and adapative FAST9 crner detection threshold
    • name FAST9_THRESHOLD value: 20
      Description: FAST9 default threshold
    • name FAST9_MIN_DISTANCE value: 10
      Description: The amount of pixels between corners that should be detected
    • name FAST9_PADDING value: 20
      Description: The outer border in which no corners will be searched
    • name FAST9_REGION_DETECT value: 1
      Description: Whether to detect fast9 corners in regions of interest or the whole image (only works with feature management)
    • name FAST9_NUM_REGIONS value: 9
      Description: The number of regions of interest to split the image into
    • name ACTFAST_LONG_STEP value: 10
      Description: Step size to take when there is no texture
    • name ACTFAST_SHORT_STEP value: 2
      Description: Step size to take when there is an edge to be followed
    • name ACTFAST_MIN_GRADIENT value: 10
      Description: Threshold that decides when there is sufficient texture for edge following
    • name ACTFAST_GRADIENT_METHOD value: 1
      Description: Whether to use a simple (0) or Sobel (1) filter
    • name CAMERA2 value: bottom_camera|front_camera
      Description: The V4L2 camera device that is used for the calculations
    • name DEROTATION_CORRECTION_FACTOR_X_CAMERA2 value: 1.0
      Description: Correction factor for derotation (in x direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)
    • name DEROTATION_CORRECTION_FACTOR_Y_CAMERA2 value: 1.0
      Description: Correction factor for derotation (in y direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)
    • name METHOD_CAMERA2 value: 0
      Description: Method used to calculate optical flow
    • name WINDOW_SIZE_CAMERA2 value: 10
      Description: Window size used for block matching (pixels)
    • name SEARCH_DISTANCE_CAMERA2 value: 10
      Description: Maximum search distance for blockmatching (pixels)
    • name SUBPIXEL_FACTOR_CAMERA2 value: 10
      Description: Amount of subpixels per pixel, used for more precise (subpixel) calculations of the flow
    • name RESOLUTION_FACTOR_CAMERA2 value: 1000
      Description: The resolution factor needed to calculate the divergence without floats
    • name DEROTATION_CAMERA2 value: 1
      Description: Derotation either turned on or off (depended on gyroscope measurements)
    • name MEDIAN_FILTER_CAMERA2 value: 0
      Description: A median filter on the resulting velocities to be turned on or off (last 5 measurements)
    • name FEATURE_MANAGEMENT_CAMERA2 value: 1
      Description: Whether to keep already tracked corners in memory for the next frame or re-detect new ones every time
    • name FPS_CAMERA2 value: 0
      Description: The (maximum) frequency to run the calculations at. If zero, it will max out at the camera frame rate
    • name TRACK_BACK_CAMERA2 value: TRUE
      Description: Whether flow vectors are tracked back to the previous image and only kept if they end up close to the original point.
    • name SHOW_FLOW_CAMERA2 value: TRUE
      Description: Whether to draw the flow vectors in the image.
    • name MAX_TRACK_CORNERS_CAMERA2 value: 25
      Description: The maximum amount of corners the Lucas Kanade algorithm is tracking between two frames
    • name MAX_ITERATIONS_CAMERA2 value: 10
      Description: Maximum number of iterations the Lucas Kanade algorithm should take
    • name THRESHOLD_VEC_CAMERA2 value: 2
      Description: Threshold in subpixels when the iterations of Lucas Kanade should stop
    • name CORNER_METHOD_CAMERA2 value: 1
      Description: Method used to look for corners, exhaustive FAST (0) or ACT-FAST (1).
    • name FAST9_ADAPTIVE_CAMERA2 value: TRUE
      Description: Whether we should use and adapative FAST9 crner detection threshold
    • name FAST9_THRESHOLD_CAMERA2 value: 20
      Description: FAST9 default threshold
    • name FAST9_MIN_DISTANCE_CAMERA2 value: 10
      Description: The amount of pixels between corners that should be detected
    • name FAST9_PADDING_CAMERA2 value: 20
      Description: The outer border in which no corners will be searched
    • name FAST9_REGION_DETECT_CAMERA2 value: 1
      Description: Whether to detect fast9 corners in regions of interest or the whole image (only works with feature management)
    • name FAST9_NUM_REGIONS_CAMERA2 value: 9
      Description: The number of regions of interest to split the image into
    • name ACTFAST_LONG_STEP_CAMERA2 value: 10
      Description: Step size to take when there is no texture
    • name ACTFAST_SHORT_STEP_CAMERA2 value: 2
      Description: Step size to take when there is an edge to be followed
    • name ACTFAST_MIN_GRADIENT_CAMERA2 value: 10
      Description: Threshold that decides when there is sufficient texture for edge following
    • name ACTFAST_GRADIENT_METHOD_CAMERA2 value: 1
      Description: Whether to use a simple (0) or Sobel (1) filter

Module functions

Init Functions

These initialization functions are called once on startup.

Periodic Functions

These functions are called periodically at the specified frequency from the module periodic loop.

  • opticflow_module_run()
    • Running at maximum module frequency.
    • Autorun: TRUE
      Periodic function automatically starts after init.

Files

Header Files

The following headers are automatically included in modules.h

Source Files

Raw cv_opticflow.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="cv_opticflow" dir="computer_vision">
<doc>
<description>
Compute optical flow.
Made for Linux video Devices.
Computes x and y velocity using optical flow and distance to ground (using sonar).
Cannot define CAMERA2 without first defining CAMERA.
</description>
<!-- Optical flow calculation parameters -->
<section name="OPTICFLOW" prefix="OPTICFLOW_">
<define name="AGL_ID" value="ABI_BROADCAST" description="ABI receive id for ABI message (sonar measurement) (default: ABI_BROADCAST)"/>
<define name="SEND_ABI_ID" value="1" description="ABI sender id for opticflow messages (default: 1)"/>
<!-- Video device parameters -->
<define name="CAMERA" value="bottom_camera|front_camera" description="The V4L2 camera device that is used for the calculations"/>
<!-- Camera parameters -->
<define name="DEROTATION_CORRECTION_FACTOR_X" value="1.0" description="Correction factor for derotation (in x direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)"/>
<define name="DEROTATION_CORRECTION_FACTOR_Y" value="1.0" description="Correction factor for derotation (in y direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)"/>
<configure name="BODY_TO_CAM_PHI" value="0" description="Rotation from body frame to camera frame around x axis"/>
<configure name="BODY_TO_CAM_THETA" value="0" description="Rotation from body frame to camera frame around y axis"/>
<configure name="BODY_TO_CAM_PSI" value="0" description="Rotation from body frame to camera frame around z axis"/>
<!-- General optical flow calculation parameters -->
<define name="METHOD" value="0" description="Method used to calculate optical flow"/>
<define name="WINDOW_SIZE" value="10" description="Window size used for block matching (pixels)"/>
<define name="SEARCH_DISTANCE" value="10" description="Maximum search distance for blockmatching (pixels)"/>
<define name="SUBPIXEL_FACTOR" value="10" description="Amount of subpixels per pixel, used for more precise (subpixel) calculations of the flow"/>
<define name="RESOLUTION_FACTOR" value="1000" description="The resolution factor needed to calculate the divergence without floats"/>
<define name="DEROTATION" value="1" description="Derotation either turned on or off (depended on gyroscope measurements)"/>
<define name="MEDIAN_FILTER" value="0" description="A median filter on the resulting velocities to be turned on or off (last 5 measurements)"/>
<define name="FEATURE_MANAGEMENT" value="1" description="Whether to keep already tracked corners in memory for the next frame or re-detect new ones every time"/>
<define name="FPS" value="0" description="The (maximum) frequency to run the calculations at. If zero, it will max out at the camera frame rate"/>
<define name="TRACK_BACK" value="TRUE" description="Whether flow vectors are tracked back to the previous image and only kept if they end up close to the original point."/>
<define name="SHOW_FLOW" value="TRUE" description="Whether to draw the flow vectors in the image."/>
<!-- Lucas Kanade optical flow calculation parameters -->
<define name="MAX_TRACK_CORNERS" value="25" description="The maximum amount of corners the Lucas Kanade algorithm is tracking between two frames"/>
<define name="MAX_ITERATIONS" value="10" description="Maximum number of iterations the Lucas Kanade algorithm should take"/>
<define name="THRESHOLD_VEC" value="2" description="Threshold in subpixels when the iterations of Lucas Kanade should stop"/>
<define name="CORNER_METHOD" value="1" description="Method used to look for corners, exhaustive FAST (0) or ACT-FAST (1)."/>
<!-- FAST9 corner detection parameters -->
<define name="FAST9_ADAPTIVE" value="TRUE" description="Whether we should use and adapative FAST9 crner detection threshold"/>
<define name="FAST9_THRESHOLD" value="20" description="FAST9 default threshold"/>
<define name="FAST9_MIN_DISTANCE" value="10" description="The amount of pixels between corners that should be detected"/>
<define name="FAST9_PADDING" value="20" description="The outer border in which no corners will be searched"/>
<define name="FAST9_REGION_DETECT" value="1" description="Whether to detect fast9 corners in regions of interest or the whole image (only works with feature management)"/>
<define name="FAST9_NUM_REGIONS" value="9" description="The number of regions of interest to split the image into"/>
<!-- ACT-FAST parameters -->
<define name="ACTFAST_LONG_STEP" value="10" description="Step size to take when there is no texture"/>
<define name="ACTFAST_SHORT_STEP" value="2" description="Step size to take when there is an edge to be followed"/>
<define name="ACTFAST_MIN_GRADIENT" value="10" description="Threshold that decides when there is sufficient texture for edge following"/>
<define name="ACTFAST_GRADIENT_METHOD" value="1" description="Whether to use a simple (0) or Sobel (1) filter"/>
<!-- =========== CAMERA 2 SETTINGS ============ -->
<!-- Video device parameters for camera 2 -->
<define name="CAMERA2" value="bottom_camera|front_camera" description="The V4L2 camera device that is used for the calculations"/>
<!-- Camera 2 parameters -->
<define name="DEROTATION_CORRECTION_FACTOR_X_CAMERA2" value="1.0" description="Correction factor for derotation (in x direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)"/>
<define name="DEROTATION_CORRECTION_FACTOR_Y_CAMERA2" value="1.0" description="Correction factor for derotation (in y direction), estimated from a fit between the gyro's rates and the resulting flow (caused by the camera not being exactly in the middle (Defaults are from an ARDrone 2)"/>
<configure name="BODY_TO_CAM_PHI_CAMERA2" value="0" description="Rotation from body frame to camera frame around x axis"/>
<configure name="BODY_TO_CAM_THETA_CAMERA2" value="0" description="Rotation from body frame to camera frame around y axis"/>
<configure name="BODY_TO_CAM_PSI_CAMERA2" value="0" description="Rotation from body frame to camera frame around z axis"/>
<!-- General optical flow calculation parameters for camera 2-->
<define name="METHOD_CAMERA2" value="0" description="Method used to calculate optical flow"/>
<define name="WINDOW_SIZE_CAMERA2" value="10" description="Window size used for block matching (pixels)"/>
<define name="SEARCH_DISTANCE_CAMERA2" value="10" description="Maximum search distance for blockmatching (pixels)"/>
<define name="SUBPIXEL_FACTOR_CAMERA2" value="10" description="Amount of subpixels per pixel, used for more precise (subpixel) calculations of the flow"/>
<define name="RESOLUTION_FACTOR_CAMERA2" value="1000" description="The resolution factor needed to calculate the divergence without floats"/>
<define name="DEROTATION_CAMERA2" value="1" description="Derotation either turned on or off (depended on gyroscope measurements)"/>
<define name="MEDIAN_FILTER_CAMERA2" value="0" description="A median filter on the resulting velocities to be turned on or off (last 5 measurements)"/>
<define name="FEATURE_MANAGEMENT_CAMERA2" value="1" description="Whether to keep already tracked corners in memory for the next frame or re-detect new ones every time"/>
<define name="FPS_CAMERA2" value="0" description="The (maximum) frequency to run the calculations at. If zero, it will max out at the camera frame rate"/>
<define name="TRACK_BACK_CAMERA2" value="TRUE" description="Whether flow vectors are tracked back to the previous image and only kept if they end up close to the original point."/>
<define name="SHOW_FLOW_CAMERA2" value="TRUE" description="Whether to draw the flow vectors in the image."/>
<!-- Lucas Kanade optical flow calculation parameters -->
<define name="MAX_TRACK_CORNERS_CAMERA2" value="25" description="The maximum amount of corners the Lucas Kanade algorithm is tracking between two frames"/>
<define name="MAX_ITERATIONS_CAMERA2" value="10" description="Maximum number of iterations the Lucas Kanade algorithm should take"/>
<define name="THRESHOLD_VEC_CAMERA2" value="2" description="Threshold in subpixels when the iterations of Lucas Kanade should stop"/>
<define name="CORNER_METHOD_CAMERA2" value="1" description="Method used to look for corners, exhaustive FAST (0) or ACT-FAST (1)."/>
<!-- FAST9 corner detection parameters -->
<define name="FAST9_ADAPTIVE_CAMERA2" value="TRUE" description="Whether we should use and adapative FAST9 crner detection threshold"/>
<define name="FAST9_THRESHOLD_CAMERA2" value="20" description="FAST9 default threshold"/>
<define name="FAST9_MIN_DISTANCE_CAMERA2" value="10" description="The amount of pixels between corners that should be detected"/>
<define name="FAST9_PADDING_CAMERA2" value="20" description="The outer border in which no corners will be searched"/>
<define name="FAST9_REGION_DETECT_CAMERA2" value="1" description="Whether to detect fast9 corners in regions of interest or the whole image (only works with feature management)"/>
<define name="FAST9_NUM_REGIONS_CAMERA2" value="9" description="The number of regions of interest to split the image into"/>
<!-- ACT-FAST parameters -->
<define name="ACTFAST_LONG_STEP_CAMERA2" value="10" description="Step size to take when there is no texture"/>
<define name="ACTFAST_SHORT_STEP_CAMERA2" value="2" description="Step size to take when there is an edge to be followed"/>
<define name="ACTFAST_MIN_GRADIENT_CAMERA2" value="10" description="Threshold that decides when there is sufficient texture for edge following"/>
<define name="ACTFAST_GRADIENT_METHOD_CAMERA2" value="1" description="Whether to use a simple (0) or Sobel (1) filter"/>
</section>
</doc>
<settings>
<dl_settings name="Vision stabilization">
<!-- Optical flow calculations parameters -->
<dl_settings name="vision_calc camera1">
<dl_setting var="opticflow[0].method" min="0" step="1" max="1" module="computer_vision/opticflow_module" shortname="method" values="LK_Fast9|EdgeFlow" param="METHOD"/>
<dl_setting var="opticflow[0].corner_method" min="0" step="1" max="1" module="computer_vision/opticflow_module" shortname="corner_method" values="exhaustive-FAST|ACT-FAST" param="CORNER_METHOD"/>
<dl_setting var="opticflow[0].window_size" module="computer_vision/opticflow_module" min="0" step="1" max="20" shortname="window_size" param="OPTICFLOW_WINDOW_SIZE"/>
<dl_setting var="opticflow[0].search_distance" module="computer_vision/opticflow_module" min="0" step="1" max="50" shortname="search_distance" param="SEARCH_DISTANCE"/>
<dl_setting var="opticflow[0].subpixel_factor" module="computer_vision/opticflow_module" min="0" step="10" max="1000" shortname="subpixel_factor" param="OPTICFLOW_SUBPIXEL_FACTOR"/>
<dl_setting var="opticflow[0].resolution_factor" module="computer_vision/opticflow_module" min="10" step="10" max="10000" shortname="resolution_factor" param="OPTICFLOW_RESOLUTION_FACTOR"/>
<dl_setting var="opticflow[0].derotation" min="0" step="1" max="1" module="computer_vision/opticflow_module" values="OFF|ON" shortname="derotation" param="OPTICFLOW_DEROTATION"/>
<dl_setting var="opticflow[0].median_filter" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="median_filter" param="OPTICFLOW_MEDIAN_FILTER"/>
<dl_setting var="opticflow[0].feature_management" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="feature_management" param="OPTICFLOW_FEATURE_MANAGEMENT"/>
<dl_setting var="opticflow[0].track_back" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="track_back" param="OPTICFLOW_TRACK_BACK"/>
<dl_setting var="opticflow[0].show_flow" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="show_flow" param="OPTICFLOW_SHOW_FLOW"/>
<!-- Specifically for Lucas Kanade and FAST9 -->
<dl_setting var="opticflow[0].max_track_corners" module="computer_vision/opticflow_module" min="0" step="1" max="500" shortname="max_trck_corners" param="OPTICFLOW_MAX_TRACK_CORNERS"/>
<dl_setting var="opticflow[0].max_iterations" module="computer_vision/opticflow_module" min="0" step="1" max="100" shortname="max_iterations" param="OPTICFLOW_MAX_ITERATIONS"/>
<dl_setting var="opticflow[0].threshold_vec" module="computer_vision/opticflow_module" min="0" step="1" max="100" shortname="threshold_vec" param="OPTICFLOW_THRESHOLD_VEC"/>
<dl_setting var="opticflow[0].fast9_adaptive" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="fast9_adaptive" param="OPTICFLOW_FAST9_ADAPTIVE"/>
<dl_setting var="opticflow[0].fast9_threshold" module="computer_vision/opticflow_module" min="0" step="1" max="255" shortname="fast9_threshold" param="OPTICFLOW_FAST9_THRESHOLD"/>
<dl_setting var="opticflow[0].fast9_min_distance" module="computer_vision/opticflow_module" min="0" step="1" max="500" shortname="fast9_min_distance" param="OPTICFLOW_FAST9_MIN_DISTANCE"/>
<dl_setting var="opticflow[0].fast9_padding" module="computer_vision/opticflow_module" min="0" step="1" max="50" shortname="fast9_padding" param="OPTICFLOW_FAST9_PADDING"/>
<dl_setting var="opticflow[0].fast9_region_detect" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="fast9_region_detect" param="OPTICFLOW_FAST9_REGION_DETECT"/>
<dl_setting var="opticflow[0].fast9_num_regions" module="computer_vision/opticflow_module" min="1" step="1" max="25" shortname="fast9_num_regions" param="OPTICFLOW_FAST9_NUM_REGIONS"/>
<!-- ACT-FAST settings -->
<dl_setting var="opticflow[0].actfast_long_step" module="computer_vision/opticflow_module" min="1" step="1" max="100" shortname="actfast_long_step" param="OPTICFLOW_ACTFAST_LONG_STEP"/>
<dl_setting var="opticflow[0].actfast_short_step" module="computer_vision/opticflow_module" min="1" step="1" max="10" shortname="actfast_short_step" param="OPTICFLOW_ACTFAST_SHORT_STEP"/>
<dl_setting var="opticflow[0].actfast_min_gradient" module="computer_vision/opticflow_module" min="1" step="1" max="255" shortname="actfast_min_gradient" param="OPTICFLOW_ACTFAST_MIN_GRADIENT"/>
<dl_setting var="opticflow[0].actfast_gradient_method" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="SIMPLE|SOBEL" shortname="actfast_gradient_method" param="OPTICFLOW_ACTFAST_GRADIENT_METHOD"/>
<!-- Changes pyramid level of lucas kanade optical flow. -->
<dl_setting var="opticflow[0].pyramid_level" module="computer_vision/opticflow_module" min="0" step="1" max="10" shortname="pyramid_level" param="OPTICFLOW_PYRAMID_LEVEL"/>
</dl_settings>
<dl_settings name="vision_calc camera2">
<dl_setting var="opticflow[1].method" min="0" step="1" max="1" module="computer_vision/opticflow_module" shortname="method" values="LK_Fast9|EdgeFlow" param="METHOD_CAMERA2"/>
<dl_setting var="opticflow[1].corner_method" min="0" step="1" max="1" module="computer_vision/opticflow_module" shortname="corner_method" values="exhaustive-FAST|ACT-FAST" param="CORNER_METHOD_CAMERA2"/>
<dl_setting var="opticflow[1].window_size" module="computer_vision/opticflow_module" min="0" step="1" max="20" shortname="window_size" param="OPTICFLOW_WINDOW_SIZE_CAMERA2"/>
<dl_setting var="opticflow[1].search_distance" module="computer_vision/opticflow_module" min="0" step="1" max="50" shortname="search_distance" param="SEARCH_DISTANCE_CAMERA2"/>
<dl_setting var="opticflow[1].subpixel_factor" module="computer_vision/opticflow_module" min="0" step="10" max="1000" shortname="subpixel_factor" param="OPTICFLOW_SUBPIXEL_FACTOR_CAMERA2"/>
<dl_setting var="opticflow[1].resolution_factor" module="computer_vision/opticflow_module" min="10" step="10" max="10000" shortname="resolution_factor" param="OPTICFLOW_RESOLUTION_FACTOR_CAMERA2"/>
<dl_setting var="opticflow[1].derotation" min="0" step="1" max="1" module="computer_vision/opticflow_module" values="OFF|ON" shortname="derotation" param="OPTICFLOW_DEROTATION_CAMERA2"/>
<dl_setting var="opticflow[1].median_filter" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="median_filter" param="OPTICFLOW_MEDIAN_FILTER_CAMERA2"/>
<dl_setting var="opticflow[1].feature_management" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="feature_management" param="OPTICFLOW_FEATURE_MANAGEMENT_CAMERA2"/>
<dl_setting var="opticflow[1].track_back" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="track_back" param="OPTICFLOW_TRACK_BACK_CAMERA2"/>
<dl_setting var="opticflow[1].show_flow" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="show_flow" param="OPTICFLOW_SHOW_FLOW_CAMERA2"/>
<!-- Specifically for Lucas Kanade and FAST9 -->
<dl_setting var="opticflow[1].max_track_corners" module="computer_vision/opticflow_module" min="0" step="1" max="500" shortname="max_trck_corners" param="OPTICFLOW_MAX_TRACK_CORNERS_CAMERA2"/>
<dl_setting var="opticflow[1].max_iterations" module="computer_vision/opticflow_module" min="0" step="1" max="100" shortname="max_iterations" param="OPTICFLOW_MAX_ITERATIONS_CAMERA2"/>
<dl_setting var="opticflow[1].threshold_vec" module="computer_vision/opticflow_module" min="0" step="1" max="100" shortname="threshold_vec" param="OPTICFLOW_THRESHOLD_VEC_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_adaptive" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="FALSE|TRUE" shortname="fast9_adaptive" param="OPTICFLOW_FAST9_ADAPTIVE_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_threshold" module="computer_vision/opticflow_module" min="0" step="1" max="255" shortname="fast9_threshold" param="OPTICFLOW_FAST9_THRESHOLD_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_min_distance" module="computer_vision/opticflow_module" min="0" step="1" max="500" shortname="fast9_min_distance" param="OPTICFLOW_FAST9_MIN_DISTANCE_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_padding" module="computer_vision/opticflow_module" min="0" step="1" max="50" shortname="fast9_padding" param="OPTICFLOW_FAST9_PADDING_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_region_detect" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="OFF|ON" shortname="fast9_region_detect" param="OPTICFLOW_FAST9_REGION_DETECT_CAMERA2"/>
<dl_setting var="opticflow[1].fast9_num_regions" module="computer_vision/opticflow_module" min="1" step="1" max="25" shortname="fast9_num_regions" param="OPTICFLOW_FAST9_NUM_REGIONS_CAMERA2"/>
<!-- ACT-FAST settings -->
<dl_setting var="opticflow[1].actfast_long_step" module="computer_vision/opticflow_module" min="1" step="1" max="100" shortname="actfast_long_step" param="OPTICFLOW_ACTFAST_LONG_STEP_CAMERA2"/>
<dl_setting var="opticflow[1].actfast_short_step" module="computer_vision/opticflow_module" min="1" step="1" max="10" shortname="actfast_short_step" param="OPTICFLOW_ACTFAST_SHORT_STEP_CAMERA2"/>
<dl_setting var="opticflow[1].actfast_min_gradient" module="computer_vision/opticflow_module" min="1" step="1" max="255" shortname="actfast_min_gradient" param="OPTICFLOW_ACTFAST_MIN_GRADIENT_CAMERA2"/>
<dl_setting var="opticflow[1].actfast_gradient_method" module="computer_vision/opticflow_module" min="0" step="1" max="1" values="SIMPLE|SOBEL" shortname="actfast_gradient_method" param="OPTICFLOW_ACTFAST_GRADIENT_METHOD_CAMERA2"/>
<!-- Changes pyramid level of lucas kanade optical flow. -->
<dl_setting var="opticflow[1].pyramid_level" module="computer_vision/opticflow_module" min="0" step="1" max="10" shortname="pyramid_level" param="OPTICFLOW_PYRAMID_LEVEL_CAMERA2"/>
</dl_settings>
</dl_settings>
</settings>
<dep>
<depends>video_thread,agl_dist,pose_history</depends>
</dep>
<header>
<file name="opticflow_module.h"/>
</header>
<init fun="opticflow_module_init()"/>
<periodic fun="opticflow_module_run()" autorun="TRUE"/>
<makefile target="ap|nps">
<!-- Include the needed Computer Vision files -->
<include name="modules/computer_vision"/>
<file name="image.c" dir="modules/computer_vision/lib/vision"/>
<file name="jpeg.c" dir="modules/computer_vision/lib/encoding"/>
<file name="rtp.c" dir="modules/computer_vision/lib/encoding"/>
<!-- The optical flow module (calculator) -->
<file name="opticflow_module.c"/>
<file name="opticflow_calculator.c" dir="modules/computer_vision/opticflow"/>
<file name="size_divergence.c" dir="modules/computer_vision/opticflow"/>
<file name="linear_flow_fit.c" dir="modules/computer_vision/opticflow"/>
<file name="pprz_algebra_float.c" dir="math"/>
<file name="pprz_matrix_decomp_float.c" dir="math"/>
<!-- Main vision calculations -->
<file name="act_fast.c" dir="modules/computer_vision/lib/vision"/>
<file name="fast_rosten.c" dir="modules/computer_vision/lib/vision"/>
<file name="lucas_kanade.c" dir="modules/computer_vision/lib/vision"/>
<file name="edge_flow.c" dir="modules/computer_vision/lib/vision"/>
<file name="undistortion.c" dir="modules/computer_vision/lib/vision"/>
</makefile>
</module>