Polygon survey from OSAM

Module XML file: nav_survey_poly_rotorcraft.xml

You can use: nav_survey_poly_osam_setup function for static definitions or nav_survey_poly_osam_setup_towards for a more flexible setup

Example for airframe file

This example contains all possible configuration options, not all of them are mandatory!

<modules>
  <load name="nav_survey_poly_rotorcraft.xml">
    <define name="POLYSURVEY_MAX_POLYGONSIZE" value="10" />
    <define name="POLYSURVEY_DEFAULT_SIZE" value="5" />
    <define name="POLYSURVEY_DEFAULT_DISTANCE" value="120" />
    <define name="POLYSURVEY_ENTRY_DISTANCE" value="4" />
  </load>
</modules>

Module configuration options

Define Options

• name: POLYSURVEY_MAX_POLYGONSIZE value: 10
  Description: max waypoints usable in polygon survey
• name: POLYSURVEY_DEFAULT_SIZE value: 5
  Description: default number of waypoints/corners used in polygon survey. Can be changed by telemetry
• name: POLYSURVEY_DEFAULT_DISTANCE value: 120
  Description: default distance in m between lines. Can be changed by telemetry
• name: POLYSURVEY_ENTRY_DISTANCE value: 4
  Description: distante between the polygon border and first line.If 0 the distance well be equal to half sweep

Files

Header Files

The following headers are automatically included in modules.h

• nav_survey_poly_rotorcraft.h

Source Files

• modules/nav/nav_survey_poly_rotorcraft.c

Raw nav_survey_poly_rotorcraft.xml file:

<!DOCTYPE module SYSTEM "module.dtd">

<module name="nav_survey_poly" dir="nav">
  <doc>
    <description>
Polygon survey from OSAM.
You can use:
* nav_survey_poly_osam_setup function for static definitions or
* nav_survey_poly_osam_setup_towards for a more flexible setup
    </description>
    <define name="POLYSURVEY_MAX_POLYGONSIZE" value="10" description="max waypoints usable in polygon survey"/>
    <define name="POLYSURVEY_DEFAULT_SIZE" value="5" description="default number of waypoints/corners used in polygon survey. Can be changed by telemetry"/>
    <define name="POLYSURVEY_DEFAULT_DISTANCE" value="120" description="default distance in m between lines. Can be changed by telemetry"/>
    <define name="POLYSURVEY_ENTRY_DISTANCE" value="4" description="distante between the polygon border and first line.If 0 the distance well be equal to half sweep"/>
  </doc>

  <settings>
    <dl_settings>
      <dl_settings NAME="P_Survey">
        <dl_setting min="0" max="20" step="1" var="Poly_Size" type="uint8_t" shortname="Size" module="modules/nav/nav_survey_poly_rotorcraft"/>
        <dl_setting min="0" max="500" step="1" var="Poly_Distance" type="float" shortname="Sweep" module="modules/nav/nav_survey_poly_rotorcraft"/>
      </dl_settings>
    </dl_settings>
  </settings>

  <header>
    <file name="nav_survey_poly_rotorcraft.h"/>
  </header>
  <makefile target="ap|nps">
    <file name="nav_survey_poly_rotorcraft.c"/>
  </makefile>
</module>