Paparazzi UAS  v5.18.0_stable-1-g6993852-dirty
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
actuators_bebop module

Actuators Driver for Bebop 1 and 2

No detailed description...

Example for airframe file

Add to your firmware section: This example contains all possible configuration options, not all of them are mandatory!

1 <module name="actuators_bebop">
2  <configure name="BEBOP_ACTUATORS_I2C_DEV" value="i2cX" />
3 </module>

Module configuration options

Configure Options

  • name: BEBOP_ACTUATORS_I2C_DEV value: i2cX
    Description: I2C port (default i2c1)


Header Files

The following headers are automatically included in modules.h

Source Files

  • /actuators.c

Raw actuators_bebop.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="actuators_bebop" dir="actuators" task="actuators">
Actuators Driver for Bebop 1 and 2
<configure name="BEBOP_ACTUATORS_I2C_DEV" value="i2cX" description="I2C port (default i2c1)"/>
<file name="actuators.h" dir="boards/bebop"/>
<makefile target="ap">
<configure name="BEBOP_ACTUATORS_I2C_DEV" default="i2c1" case="upper|lower"/>
<define name="ACTUATORS"/>
<file name="actuators.c" dir="$(SRC_BOARD)"/>
<test firmware="rotorcraft">
<configure name="SRC_BOARD" value="boards/bebop"/>
<define name="BEBOP_ACTUATORS_I2C_DEV" value="i2c1"/>
<define name="USE_I2C1"/>