uart_tunnel.c File Reference

#include <BOARD_CONFIG>
#include "mcu.h"
#include "mcu_periph/sys_time.h"
#include "mcu_periph/gpio.h"
#include "led.h"

Include dependency graph for uart_tunnel.c:

Go to the source code of this file.

Macros
#define	A_PORT   GPIOA
#define	A_RX_PIN   GPIO10
#define	A_RX_PORT   A_PORT
#define	A_TX_PIN   GPIO9
#define	A_TX_PORT   A_PORT
#define	B_PORT   GPIOA
#define	B_RX_PIN   GPIO3
#define	B_RX_PORT   B_PORT
#define	B_TX_PIN   GPIO2
#define	B_TX_PORT   B_PORT

Functions
static void	main_periodic (void)
static void	main_event (void)
void	Delay (volatile uint32_t nCount)
int	main (void)

Macro Definition Documentation

#define A_PORT   GPIOA

Definition at line 29 of file uart_tunnel.c.

#define A_RX_PIN   GPIO10

Definition at line 30 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define A_RX_PORT   A_PORT

Definition at line 31 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define A_TX_PIN   GPIO9

Definition at line 32 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define A_TX_PORT   A_PORT

Definition at line 33 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define B_PORT   GPIOA

Definition at line 36 of file uart_tunnel.c.

#define B_RX_PIN   GPIO3

Definition at line 37 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define B_RX_PORT   B_PORT

Definition at line 38 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define B_TX_PIN   GPIO2

Definition at line 39 of file uart_tunnel.c.

Referenced by main(), and main_event().

#define B_TX_PORT   B_PORT

Definition at line 40 of file uart_tunnel.c.

Referenced by main(), and main_event().

Function Documentation

void Delay

(

volatile uint32_t

nCount

)

Definition at line 46 of file uart_tunnel.c.

int main

(

void

)

Definition at line 51 of file uart_tunnel.c.

References A_RX_PIN, A_RX_PORT, A_TX_PIN, A_TX_PORT, B_RX_PIN, B_RX_PORT, B_TX_PIN, B_TX_PORT, gpio_clear(), gpio_setup_input_pullup(), gpio_setup_output(), main_event(), main_periodic(), mcu_init(), sys_time_check_and_ack_timer(), and sys_time_register_timer().

Here is the call graph for this function:

static void main_event ( void  )

inlinestatic

Definition at line 85 of file uart_tunnel.c.

References A_RX_PIN, A_RX_PORT, A_TX_PIN, A_TX_PORT, B_RX_PIN, B_RX_PORT, B_TX_PIN, B_TX_PORT, foo, gpio_clear(), gpio_get(), gpio_set(), LED_OFF, and LED_ON.

Referenced by main(), nps_autopilot_run_step(), and thd_ap().

Here is the call graph for this function:

Here is the caller graph for this function:

static void main_periodic ( void  )

inlinestatic

Definition at line 80 of file uart_tunnel.c.

References LED_PERIODIC.

Referenced by main().

Here is the caller graph for this function: