actuators_asctec.c

Go to the documentation of this file.

/*
 * Copyright (C) 2008-2009 Antoine Drouin <poinix@gmail.com>
 *
 * This file is part of paparazzi.
 *
 * paparazzi is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * paparazzi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with paparazzi; see the file COPYING.  If not, write to
 * the Free Software Foundation, 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

#include "subsystems/actuators.h"
#include "subsystems/actuators/actuators_asctec.h"

#include "mcu_periph/i2c.h"
#include "mcu_periph/sys_time.h"

#define ASCTEC_MIN_CMD -100
#define ASCTEC_MAX_CMD 100

#define ASCTEC_MIN_THROTTLE 0
#define ASCTEC_MAX_THROTTLE 200

#define ACTUATORS_ASCTEC_SLAVE_ADDR 0x02

PRINT_CONFIG_VAR(ACTUATORS_ASCTEC_I2C_DEV)

struct ActuatorsAsctec actuators_asctec;

void actuators_asctec_init(void)
{
  actuators_asctec.cmd = NONE;
  actuators_asctec.cur_addr = FRONT;
  actuators_asctec.new_addr = FRONT;
  actuators_asctec.i2c_trans.status = I2CTransSuccess;
  actuators_asctec.i2c_trans.type = I2CTransTx;
  actuators_asctec.i2c_trans.slave_addr = ACTUATORS_ASCTEC_SLAVE_ADDR;
  actuators_asctec.i2c_trans.len_w = 4;
  actuators_asctec.nb_err = 0;
}

void actuators_asctec_set(bool motors_on)
{
#if defined ACTUATORS_START_DELAY && ! defined SITL
  if (!actuators_delay_done) {
    if (SysTimeTimer(actuators_delay_time) < USEC_OF_SEC(ACTUATORS_START_DELAY)) { return; }
    else { actuators_delay_done = true; }
  }
#endif

  switch (actuators_asctec.i2c_trans.status) {
    case I2CTransFailed:
      actuators_asctec.nb_err++;
      actuators_asctec.i2c_trans.status = I2CTransDone;
      break;
    case I2CTransSuccess:
    case I2CTransDone:
      actuators_asctec.i2c_trans.status = I2CTransDone;
      break;
    default:
      actuators_asctec.nb_err++;
      return;
  }

#ifdef KILL_MOTORS
  actuators_asctec.cmds[PITCH]  = 0;
  actuators_asctec.cmds[ROLL]   = 0;
  actuators_asctec.cmds[YAW]    = 0;
  actuators_asctec.cmds[THRUST] = 0;
#else /* ! KILL_MOTORS */
  Bound(actuators_asctec.cmds[PITCH], ASCTEC_MIN_CMD, ASCTEC_MAX_CMD);
  Bound(actuators_asctec.cmds[ROLL], ASCTEC_MIN_CMD, ASCTEC_MAX_CMD);
  Bound(actuators_asctec.cmds[YAW],  ASCTEC_MIN_CMD, ASCTEC_MAX_CMD);
  if (motors_on) {
    Bound(actuators_asctec.cmds[THRUST], ASCTEC_MIN_THROTTLE + 1, ASCTEC_MAX_THROTTLE);
  } else {
    actuators_asctec.cmds[THRUST] = 0;
  }
#endif /* KILL_MOTORS  */

  switch (actuators_asctec.cmd) {
    case TEST:
      actuators_asctec.i2c_trans.buf[0] = 251;
      actuators_asctec.i2c_trans.buf[1] = actuators_asctec.cur_addr;
      actuators_asctec.i2c_trans.buf[2] = 0;
      actuators_asctec.i2c_trans.buf[3] = 231 + actuators_asctec.cur_addr;
      break;
    case REVERSE:
      actuators_asctec.i2c_trans.buf[0] = 254;
      actuators_asctec.i2c_trans.buf[1] = actuators_asctec.cur_addr;
      actuators_asctec.i2c_trans.buf[2] = 0;
      actuators_asctec.i2c_trans.buf[3] = 234 + actuators_asctec.cur_addr;
      break;
    case SET_ADDR:
      actuators_asctec.i2c_trans.buf[0] = 250;
      actuators_asctec.i2c_trans.buf[1] = actuators_asctec.cur_addr;
      actuators_asctec.i2c_trans.buf[2] = actuators_asctec.new_addr;
      actuators_asctec.i2c_trans.buf[3] = 230 + actuators_asctec.cur_addr +
                                          actuators_asctec.new_addr;
      actuators_asctec.cur_addr = actuators_asctec.new_addr;
      break;
    case NONE:
      actuators_asctec.i2c_trans.buf[0] = 100 - actuators_asctec.cmds[PITCH];
      actuators_asctec.i2c_trans.buf[1] = 100 + actuators_asctec.cmds[ROLL];
      actuators_asctec.i2c_trans.buf[2] = 100 - actuators_asctec.cmds[YAW];
      actuators_asctec.i2c_trans.buf[3] = actuators_asctec.cmds[THRUST];
      break;
    default:
      break;
  }
  actuators_asctec.cmd = NONE;

  i2c_transmit(&ACTUATORS_ASCTEC_I2C_DEV, &actuators_asctec.i2c_trans,
               ACTUATORS_ASCTEC_SLAVE_ADDR, 4);

}