#include "modules/mission/copilot.h"
#include "subsystems/datalink/telemetry.h"
#include "firmwares/fixedwing/nav.h"
#include "subsystems/navigation/common_nav.h"
#include "math/pprz_geodetic_float.h"

Include dependency graph for copilot_fixedwing.c:

Functions
void	copilot_parse_move_wp_dl (uint8_t *buf)
	If MOVE_WP from GCS. More...

Detailed Description

Mission Computer module, interfacing the mission computer (also known as Copilot), based losely on ISaAC: The Intelligent Safety and Airworthiness Co-Pilot module Based on paper "A Payload Verification and Management Framework for Small UAV-based Personal Remote Sensing Systems" by Cal Coopmans and Chris Coffin. Link: http://ieeexplore.ieee.org/abstract/document/6309316/

More info can be found on http://wiki.paparazziuav.org/wiki/Mission_computer

Copilot is intended mainly for mapping applications.

This module processes messages from Copilot, and either forwards them to the GCS (such as CAMERA_SNAPSHOT or CAMERA_PAYLOAD messages), or responds to them as necessary (such as MOVE_WP).

The module assumes the source of the messages is trusted (i.e. not authentication besides AC_ID check is performed).

Definition in file copilot_fixedwing.c.

Function Documentation

◆ copilot_parse_move_wp_dl()

void copilot_parse_move_wp_dl ( uint8_t * buf )

If MOVE_WP from GCS.

processed in firmware_parse_msg(dev, trans, buf); with regular buffer
reponse over telemetry (regular buffer)
here send WP_MOVED over extra_dl

If MOVE_WP from extra_dl

processed in firmware_parse_msg(dev, trans, buf); with extra buffer
response over extra_dl
send an update to GCS

In both cases, the MOVE_WP message was already processed in firmware_parse here we are taking care only about propagating the change

Definition at line 67 of file copilot_fixedwing.c.

References LlaCoor_f::alt, UtmCoor_f::alt, DefaultChannel, DefaultDevice, dl_buffer, UtmCoor_f::east, extra_dl_buffer, extra_pprz_tp, LlaCoor_f::lat, LlaCoor_f::lon, nav_utm_east0, nav_utm_north0, nav_utm_zone0, nb_waypoint, UtmCoor_f::north, utm_of_lla_f(), waypoints, point::x, point::y, and UtmCoor_f::zone.

Here is the call graph for this function:

Functions

Detailed Description

Function Documentation

◆ copilot_parse_move_wp_dl()