stabilization_rate module

Rate controller for rotorcraft

No detailed description...

Example for airframe file

Add to your firmware section:

<module name="stabilization_rate"/>

Module configuration options

Airframe file section

• section name: STABILIZATION_RATE prefix: STABILIZATION_RATE_
  • name SP_MAX_P value: 300
    Description: max roll rate setpoint
  • name SP_MAX_Q value: 300
    Description: max pitch rate setpoint
  • name SP_MAX_R value: 240
    Description: max yaw rate setpoint
  • name DEADBAND_P value: 20
    Description: deadband on roll rate
  • name DEADBAND_Q value: 20
    Description: deadband on pitch rate
  • name DEADBAND_R value: 200
    Description: deadband on yaw rate
  • name GAIN_P value: 1000
    Description: feedback P roll rate gain
  • name GAIN_Q value: 1000
    Description: feedback P pitch rate gain
  • name GAIN_R value: 800
    Description: feedback P yaw rate gain
  • name IGAIN_P value: 75
    Description: feedback I roll rate gain
  • name IGAIN_Q value: 75
    Description: feedback I pitch rate gain
  • name IGAIN_R value: 50
    Description: feedback I yaw rate gain

Auto-loaded modules

The following modules are automatically loaded (just as if you had added them in the airframe file)

• module__stabilizationrotorcraft

Module functions

Init Functions

These initialization functions are called once on startup.

• stabilization_rate_init()

Files

Header Files

The following headers are automatically included in modules.h

• stabilization_rate.h

Source Files

• /stabilization/stabilization_rate.c

Raw stabilization_rate.xml file:

<!DOCTYPE module SYSTEM "module.dtd">

<module name="stabilization_rate" dir="stabilization">
  <doc>
    <description>
      Rate controller for rotorcraft
    </description>
    <section name="STABILIZATION_RATE" prefix="STABILIZATION_RATE_">
      <define name="SP_MAX_P" value="300" description="max roll rate setpoint" unit="deg/s"/>
      <define name="SP_MAX_Q" value="300" description="max pitch rate setpoint" unit="deg/s"/>
      <define name="SP_MAX_R" value="240" description="max yaw rate setpoint" unit="deg/s"/>
      <define name="DEADBAND_P" value="20" description="deadband on roll rate"/>
      <define name="DEADBAND_Q" value="20" description="deadband on pitch rate"/>
      <define name="DEADBAND_R" value="200" description="deadband on yaw rate"/>
      <define name="GAIN_P" value="1000" description="feedback P roll rate gain"/>
      <define name="GAIN_Q" value="1000" description="feedback P pitch rate gain"/>
      <define name="GAIN_R" value="800" description="feedback P yaw rate gain"/>
      <define name="IGAIN_P" value="75" description="feedback I roll rate gain"/>
      <define name="IGAIN_Q" value="75" description="feedback I pitch rate gain"/>
      <define name="IGAIN_R" value="50" description="feedback I yaw rate gain"/>
    </section>
  </doc>
  <settings target="ap|nps">
    <dl_settings>
      <dl_settings NAME="Rate Loop">
        <dl_setting var="stabilization_rate_gain.p" min="1" step="1" max="1000" shortname="pgain p" param="STABILIZATION_RATE_GAIN_P" type="int32" persistent="true" module="stabilization/stabilization_rate"/>
        <dl_setting var="stabilization_rate_gain.q" min="1" step="1" max="1000" shortname="pgain q" param="STABILIZATION_RATE_GAIN_Q" type="int32" persistent="true"/>
        <dl_setting var="stabilization_rate_gain.r" min="1" step="1" max="1000" shortname="pgain r" param="STABILIZATION_RATE_GAIN_R" type="int32" persistent="true"/>
        <dl_setting var="stabilization_rate_igain.p" min="0" step="1" max="500" shortname="igain p" param="STABILIZATION_RATE_IGAIN_P" type="int32" persistent="true"/>
        <dl_setting var="stabilization_rate_igain.q" min="0" step="1" max="500" shortname="igain q" param="STABILIZATION_RATE_IGAIN_Q" type="int32" persistent="true"/>
        <dl_setting var="stabilization_rate_igain.r" min="0" step="1" max="500" shortname="igain r" param="STABILIZATION_RATE_IGAIN_R" type="int32" persistent="true"/>
      </dl_settings>
    </dl_settings>
  </settings>
  <autoload name="stabilization" type="rotorcraft"/>
  <header>
    <file name="stabilization_rate.h"/>
  </header>
  <init fun="stabilization_rate_init()"/>
  <makefile target="ap|nps" firmware="rotorcraft">
    <file name="stabilization_rate.c" dir="$(SRC_FIRMWARE)/stabilization"/>
    <define name="USE_STABILIZATION_RATE"/>
  </makefile>
</module>