std.h File Reference

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	TRUE   (1==1)
#define	FALSE   (1==0)
#define	CameraLinkTransmit(_x)

Macro Definition Documentation

#define CameraLinkTransmit

(

_x

)

Value:

{       \
    uint8_t _tmp = _x;         \
    write(fd,&_tmp,1);         \
  }

Definition at line 7 of file std.h.

#define FALSE   (1==0)

Definition at line 5 of file std.h.

Referenced by _ISR(), actuators_ardrone_motor_status(), actuators_bebop_commit(), ahrs_switch(), ArduIMU_periodicGPS(), autopilot_set_mode(), baro_ms5611_init(), BulkOut(), cv_blob_locator_event(), Drift_correction(), fifo_get(), fifo_put(), georeference_run(), gps_i2c_msg_ready(), gps_ubx_i2c_init(), gps_ubx_ucenter_periodic(), guidance_h_read_rc(), handle_ins_msg(), HandleClassRequest(), hott_enable_receiver(), hott_enable_transmitter(), i2c_idle(), i2c_submit(), imu_px4_event(), imu_xsens_event(), lsm303dlhc_spi_init(), main(), mavlink_common_message_handler(), max7456_periodic(), mf_daq_send_report(), motor_mixing_run(), mpu60x0_i2c_event(), mpu9250_i2c_event(), nav_launcher_run(), nav_launcher_setup(), nav_skid_landing_setup(), nav_survey_losange_carto(), nav_survey_poly_osam_ResetSweepNumber(), nps_autopilot_init(), nps_fdm_run_step(), nps_radio_control_available(), nps_sensor_accel_init(), nps_sensor_airspeed_init(), nps_sensor_baro_init(), nps_sensor_gps_init(), nps_sensor_gyro_init(), nps_sensor_mag_init(), nps_sensor_sonar_init(), nps_sensor_temperature_init(), nps_sensors_airspeed_available(), nps_sensors_baro_available(), nps_sensors_gps_available(), nps_sensors_gyro_available(), nps_sensors_mag_available(), nps_sensors_sonar_available(), nps_sensors_temperature_available(), opticFlowLK_flat(), parse_acinfo_dl(), ppm_arch_init(), process_rx_dma_interrupt(), process_tx_dma_interrupt(), pwm_input_init(), px4flash_event(), sdio_connect(), sdio_disconnect(), SpektrumUartInit(), spi1_arch_init(), spi2_arch_init(), spi_lock(), spi_resume(), spi_start_dma_transaction(), spi_submit(), stabilization_attitude_init(), stabilization_attitude_run(), VCOM_check_free_space(), and vPoint().

#define TRUE   (1==1)

Definition at line 4 of file std.h.

Referenced by actuators_dualpwm_arch_init(), actuators_pwm_arch_init(), adc_init(), ahrs_switch(), ArduIMU_periodic(), ArduIMU_periodicGPS(), baro_periodic(), baro_scp_event(), CHIMU_ProcessMessage(), fifo_get(), fifo_put(), gps_i2c_begin(), gps_ubx_i2c_init(), gps_ubx_i2c_periodic(), gps_udp_init(), guidance_h_read_rc(), HandleClassRequest(), hott_check_serial_data(), hott_enable_receiver(), hott_enable_transmitter(), hott_periodic(), hott_send_msg(), i2c_submit(), log_image(), lsm303dlhc_spi_event(), lsm303dlhc_spi_send_config(), main(), mavlink_common_message_handler(), nav_launcher_run(), nav_skid_landing_run(), navdata_read(), nps_autopilot_init(), nps_fdm_run_step(), nps_main_parse_options(), nps_main_periodic(), nps_radio_control_available(), nps_sensor_accel_run_step(), nps_sensor_airspeed_run_step(), nps_sensor_baro_run_step(), nps_sensor_gps_run_step(), nps_sensor_gyro_run_step(), nps_sensor_mag_run_step(), nps_sensor_sonar_run_step(), nps_sensor_temperature_run_step(), nps_sensors_airspeed_available(), nps_sensors_baro_available(), nps_sensors_gps_available(), nps_sensors_gyro_available(), nps_sensors_mag_available(), nps_sensors_sonar_available(), nps_sensors_temperature_available(), on_serial_data_received(), opticFlowLK_flat(), parse_acinfo_dl(), parse_xsens700_msg(), parse_xsens_buffer(), parse_xsens_msg(), px4flash_event(), save_shot_on_disk(), sdio_connect(), sdio_disconnect(), servo_switch_periodic(), spi1_arch_init(), spi2_arch_init(), spi_lock(), spi_resume(), spi_slave_register(), spi_start_dma_transaction(), spi_submit(), stabilization_attitude_init(), stabilization_rate_run(), sys_tick_handler(), thd_spi1(), thd_spi2(), thd_sys_tick(), tmp102_event(), trigger_ext_periodic(), v4l2_capture_thread(), VCOM_check_free_space(), VCOM_init(), vn100_periodic_task(), and windturbine_periodic().