ms5611_i2c.c File Reference

Measurement Specialties (Intersema) MS5611-01BA and MS5607-02BA03 pressure/temperature sensor interface for I2C. More...

#include "peripherals/ms5611_i2c.h"

Include dependency graph for ms5611_i2c.c:

Go to the source code of this file.

Functions
void	ms5611_i2c_init (struct Ms5611_I2c *ms, struct i2c_periph *i2c_p, uint8_t addr, bool is_ms5607)
void	ms5611_i2c_start_configure (struct Ms5611_I2c *ms)
void	ms5611_i2c_start_conversion (struct Ms5611_I2c *ms)
void	ms5611_i2c_periodic_check (struct Ms5611_I2c *ms)
	Periodic function to ensure proper delay after triggering reset or conversion. More...
void	ms5611_i2c_event (struct Ms5611_I2c *ms)

Detailed Description

Measurement Specialties (Intersema) MS5611-01BA and MS5607-02BA03 pressure/temperature sensor interface for I2C.

Definition in file ms5611_i2c.c.

Function Documentation

void ms5611_i2c_event

(

struct Ms5611_I2c *

ms

)

Definition at line 119 of file ms5611_i2c.c.

References i2c_transaction::buf, Ms5611Data::c, Ms5611Data::d1, Ms5611Data::d2, Ms5611_I2c::data, Ms5611_I2c::data_available, Ms5611_I2c::i2c_p, Ms5611_I2c::i2c_trans, i2c_transceive(), i2c_transmit(), I2CTransDone, I2CTransFailed, I2CTransSuccess, if(), Ms5611_I2c::initialized, Ms5611_I2c::is_ms5607, ms5607_calc(), ms5611_calc(), ms5611_prom_crc_ok(), MS5611_PROM_READ, MS5611_START_CONV_D2, MS5611_STATUS_ADC_D1, MS5611_STATUS_ADC_D2, MS5611_STATUS_CONV_D2, MS5611_STATUS_IDLE, MS5611_STATUS_PROM, MS5611_STATUS_UNINIT, Ms5611_I2c::prom_cnt, PROM_NB, i2c_transaction::slave_addr, Ms5611_I2c::status, and i2c_transaction::status.

Referenced by baro_event(), and baro_ms5611_event().

Here is the call graph for this function:

Here is the caller graph for this function:

void ms5611_i2c_init	(	struct Ms5611_I2c *	ms,
		struct i2c_periph *	i2c_p,
		uint8_t	addr,
		bool	is_ms5607
	)

Definition at line 33 of file ms5611_i2c.c.

References Ms5611_I2c::data_available, Ms5611_I2c::i2c_p, Ms5611_I2c::i2c_trans, I2CTransDone, Ms5611_I2c::initialized, Ms5611_I2c::is_ms5607, MS5611_STATUS_UNINIT, Ms5611_I2c::prom_cnt, i2c_transaction::slave_addr, Ms5611_I2c::status, and i2c_transaction::status.

Referenced by baro_init(), and baro_ms5611_init().

Here is the caller graph for this function:

void ms5611_i2c_periodic_check

(

struct Ms5611_I2c *

ms

)

Periodic function to ensure proper delay after triggering reset or conversion.

Should run at 100Hz max. Typical conversion time is 8.22ms at max resolution.

Definition at line 78 of file ms5611_i2c.c.

References i2c_transaction::buf, Ms5611_I2c::i2c_p, Ms5611_I2c::i2c_trans, i2c_transceive(), I2CTransDone, MS5611_ADC_READ, MS5611_PROM_READ, MS5611_STATUS_ADC_D1, MS5611_STATUS_ADC_D2, MS5611_STATUS_CONV_D1, MS5611_STATUS_CONV_D1_OK, MS5611_STATUS_CONV_D2, MS5611_STATUS_CONV_D2_OK, MS5611_STATUS_PROM, MS5611_STATUS_RESET, MS5611_STATUS_RESET_OK, Ms5611_I2c::prom_cnt, i2c_transaction::slave_addr, Ms5611_I2c::status, and i2c_transaction::status.

Referenced by baro_ms5611_periodic_check(), and ms5611_i2c_periodic().

Here is the call graph for this function:

Here is the caller graph for this function:

void ms5611_i2c_start_configure

(

struct Ms5611_I2c *

ms

)

Definition at line 51 of file ms5611_i2c.c.

References i2c_transaction::buf, Ms5611_I2c::i2c_p, Ms5611_I2c::i2c_trans, i2c_transmit(), Ms5611_I2c::initialized, MS5611_SOFT_RESET, MS5611_STATUS_RESET, MS5611_STATUS_UNINIT, Ms5611_I2c::prom_cnt, i2c_transaction::slave_addr, and Ms5611_I2c::status.

Referenced by ms5611_i2c_read().

Here is the call graph for this function:

Here is the caller graph for this function:

void ms5611_i2c_start_conversion

(

struct Ms5611_I2c *

ms

)

Definition at line 62 of file ms5611_i2c.c.

References i2c_transaction::buf, Ms5611_I2c::i2c_p, Ms5611_I2c::i2c_trans, i2c_transmit(), I2CTransDone, MS5611_START_CONV_D1, MS5611_STATUS_CONV_D1, MS5611_STATUS_IDLE, i2c_transaction::slave_addr, Ms5611_I2c::status, and i2c_transaction::status.

Referenced by ms5611_i2c_read().

Here is the call graph for this function:

Here is the caller graph for this function: