Paparazzi UAS  v5.12_stable-4-g9b43e9b
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
imu_navstik module

Navstik IMU: MPU60x0 and HMC5883 via I2C.

No detailed description...

Example for airframe file

Add to your firmware section: This example contains all possible configuration options, not all of them are mandatory!

1 <module name="imu_navstik">
2  <configure name="NAVSTIK_MAG_I2C_DEV" value="i2c3" />
3  <configure name="NAVSTIK_MPU_I2C_DEV" value="i2c1" />
4 </module>

Module configuration options

Configure Options

  • name: NAVSTIK_MAG_I2C_DEV value: i2c3
    Description: I2C device to use for MAG
  • name: NAVSTIK_MPU_I2C_DEV value: i2c1
    Description: I2C device to use for MPU

Airframe file section

  • section name: IMU prefix: IMU_
    • name MAG_X_NEUTRAL value: 2358
    • name MAG_Y_NEUTRAL value: 2362
    • name MAG_Z_NEUTRAL value: 2119
    • name MAG_X_SENS value: 3.4936416
    • name MAG_Y_SENS value: 3.607713
    • name MAG_Z_SENS value: 4.90788848

Auto-loaded modules

The following modules are automatically loaded (just as if you had added them in the airframe file)

Module functions

Init Functions

These initialization functions are called once on startup.

Event Functions

These event functions are called in each cycle of the module event loop.

Periodic Functions

These functions are called periodically at the specified frequency from the module periodic loop.

  • imu_navstik_periodic()
    • Running at maximum module frequency.
    • Autorun: LOCK
      Periodic function automatically starts after init and can't be stopped.


Header Files

The following headers are automatically included in modules.h

Source Files

Raw imu_navstik.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="imu_navstik" dir="imu">
Navstik IMU: MPU60x0 and HMC5883 via I2C.
<configure name="NAVSTIK_MAG_I2C_DEV" value="i2c3" description="I2C device to use for MAG"/>
<configure name="NAVSTIK_MPU_I2C_DEV" value="i2c1" description="I2C device to use for MPU"/>
<section name="IMU" prefix="IMU_">
<define name="MAG_X_NEUTRAL" value="2358"/>
<define name="MAG_Y_NEUTRAL" value="2362"/>
<define name="MAG_Z_NEUTRAL" value="2119"/>
<define name="MAG_X_SENS" value="3.4936416" integer="16"/>
<define name="MAG_Y_SENS" value="3.607713" integer="16"/>
<define name="MAG_Z_SENS" value="4.90788848" integer="16"/>
<autoload name="imu_common"/>
<autoload name="imu_nps"/>
<file name="imu_navstik.h" dir="subsystems/imu"/>
<init fun="imu_navstik_init()"/>
<periodic fun="imu_navstik_periodic()"/>
<event fun="imu_navstik_event()"/>
<makefile target="!sim|nps|fbw">
<configure name="NAVSTIK_MAG_I2C_DEV" default="i2c3" case="lower|upper"/>
<define name="NAVSTIK_MAG_I2C_DEV" value="$(NAVSTIK_MAG_I2C_DEV_LOWER)"/>
<define name="USE_$(NAVSTIK_MAG_I2C_DEV_UPPER)"/>
<configure name="NAVSTIK_MPU_I2C_DEV" default="i2c1" case="lower|upper"/>
<define name="NAVSTIK_MPU_I2C_DEV" value="$(NAVSTIK_MPU_I2C_DEV_LOWER)"/>
<define name="USE_$(NAVSTIK_MPU_I2C_DEV_UPPER)"/>
<define name="IMU_TYPE_H" value="subsystems/imu/imu_navstik.h" type="string"/>
<file name="mpu60x0.c" dir="peripherals"/>
<file name="mpu60x0_i2c.c" dir="peripherals"/>
<file name="hmc58xx.c" dir="peripherals"/>
<file name="imu_navstik.c" dir="subsystems/imu"/>