usb_ser_hw.c

Go to the documentation of this file.

/*
  LPCUSB, an USB device driver for LPC microcontrollers
  Copyright (C) 2006 Bertrik Sikken (bertrik@sikken.nl)
    adapted to pprz    Martin Mueller (martinmm@pfump.org)

  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in the
     documentation and/or other materials provided with the distribution.
  3. The name of the author may not be used to endorse or promote products
     derived from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*
  Minimal implementation of a USB serial port, using the CDC class.
  This example application simply echoes everything it receives right back
  to the host.

  Windows:
  Extract the usbser.sys file from .cab file in C:\WINDOWS\Driver Cache\i386
  and store it somewhere (C:\temp is a good place) along with the usbser.inf
  file. Then plug in the LPC214x and direct windows to the usbser driver.
  Windows then creates an extra COMx port that you can open in a terminal
  program, like hyperterminal.

  Linux:
  The device should be recognised automatically by the cdc_acm driver,
  which creates a /dev/ttyACMx device file that acts just like a regular
  serial port.

*/


#include <string.h>
#include "std.h"
#include <stdbool.h>
#include "LPC21xx.h"
#include "armVIC.h"
#include "mcu_periph/usb_serial.h"
#include BOARD_CONFIG

#include "lpcusb/usbapi.h"

#if USE_USB_SERIAL
#if PCLK < 18000000
#error PCLK needs to be higher than 18MHz for USB to work properly
#endif
#endif

#ifndef USB_VIC_SLOT
#define USB_VIC_SLOT 10
#endif

#define INT_IN_EP               0x81
#define BULK_OUT_EP             0x05
#define BULK_IN_EP              0x82

#define MAX_PACKET_SIZE         64

#define LE_WORD(x)              ((x)&0xFF),((x)>>8)

// CDC definitions
#define CS_INTERFACE            0x24
#define CS_ENDPOINT             0x25

#define SET_LINE_CODING         0x20
#define GET_LINE_CODING         0x21
#define SET_CONTROL_LINE_STATE  0x22

#define VCOM_FIFO_SIZE          128

#define EOF                     (-1)
#define ASSERT(x)

typedef struct {
  int         head;
  int         tail;
  uint8_t     *buf;
} fifo_t;

// data structure for GET_LINE_CODING / SET_LINE_CODING class requests
typedef struct {
  uint32_t    dwDTERate;
  uint8_t     bCharFormat;
  uint8_t     bParityType;
  uint8_t     bDataBits;
} TLineCoding;

int allow_line_coding = 0;
/* this settings are virtual unless you enable line coding */
static TLineCoding LineCoding = {115200, 0, 0, 8};
static uint8_t abBulkBuf[64];
static uint8_t abClassReqData[8];

static uint8_t txdata[VCOM_FIFO_SIZE];
static uint8_t rxdata[VCOM_FIFO_SIZE];

static fifo_t txfifo;
static fifo_t rxfifo;

static bool BulkOut_is_blocked = false;

// forward declaration of interrupt handler
static void USBIntHandler(void) __attribute__((interrupt("IRQ")));

static void BulkOut(U8 bEP, U8 bEPStatus);

#ifdef USE_USB_LINE_CODING
void set_linecoding(TLineCoding linecoding);
#endif

void fifo_init(fifo_t *fifo, U8 *buf);
BOOL fifo_put(fifo_t *fifo, U8 c);
BOOL fifo_get(fifo_t *fifo, U8 *pc);
int  fifo_avail(fifo_t *fifo);
int  fifo_free(fifo_t *fifo);

static const uint8_t abDescriptors[] = {

// device descriptor
  0x12,
  DESC_DEVICE,
  LE_WORD(0x0101),      // bcdUSB
  0x02,           // bDeviceClass
  0x00,           // bDeviceSubClass
  0x00,           // bDeviceProtocol
  MAX_PACKET_SIZE0,     // bMaxPacketSize
  LE_WORD(0x7070),      // idVendor
  LE_WORD(0x1235),      // idProduct
  LE_WORD(0x0100),      // bcdDevice
  0x01,           // iManufacturer
  0x02,           // iProduct
  0x03,           // iSerialNumber
  0x01,           // bNumConfigurations

// configuration descriptor
  0x09,
  DESC_CONFIGURATION,
  LE_WORD(67),        // wTotalLength
  0x02,           // bNumInterfaces
  0x01,           // bConfigurationValue
  0x00,           // iConfiguration
  0xC0,           // bmAttributes
  0x32,           // bMaxPower
// control class interface
  0x09,
  DESC_INTERFACE,
  0x00,           // bInterfaceNumber
  0x00,           // bAlternateSetting
  0x01,           // bNumEndPoints
  0x02,           // bInterfaceClass
  0x02,           // bInterfaceSubClass
  0x01,           // bInterfaceProtocol, linux requires value of 1 for the cdc_acm module
  0x00,           // iInterface
// header functional descriptor
  0x05,
  CS_INTERFACE,
  0x00,
  LE_WORD(0x0110),
// call management functional descriptor
  0x05,
  CS_INTERFACE,
  0x01,
  0x01,           // bmCapabilities = device handles call management
  0x01,           // bDataInterface
// ACM functional descriptor
  0x04,
  CS_INTERFACE,
  0x02,
  0x02,           // bmCapabilities
// union functional descriptor
  0x05,
  CS_INTERFACE,
  0x06,
  0x00,           // bMasterInterface
  0x01,           // bSlaveInterface0
// notification EP
  0x07,
  DESC_ENDPOINT,
  INT_IN_EP,          // bEndpointAddress
  0x03,           // bmAttributes = intr
  LE_WORD(8),         // wMaxPacketSize
  0xFE,           // bInterval
// data class interface descriptor
  0x09,
  DESC_INTERFACE,
  0x01,           // bInterfaceNumber
  0x00,           // bAlternateSetting
  0x02,           // bNumEndPoints
  0x0A,           // bInterfaceClass = data
  0x00,           // bInterfaceSubClass
  0x00,           // bInterfaceProtocol
  0x00,           // iInterface
// data EP OUT
  0x07,
  DESC_ENDPOINT,
  BULK_OUT_EP,        // bEndpointAddress
  0x02,           // bmAttributes = bulk
  LE_WORD(MAX_PACKET_SIZE), // wMaxPacketSize
  0x00,           // bInterval
// data EP in
  0x07,
  DESC_ENDPOINT,
  BULK_IN_EP,         // bEndpointAddress
  0x02,           // bmAttributes = bulk
  LE_WORD(MAX_PACKET_SIZE), // wMaxPacketSize
  0x00,           // bInterval

  // string descriptors
  0x04,
  DESC_STRING,
  LE_WORD(0x0409),

  0x0E,
  DESC_STRING,
  'L', 0, 'P', 0, 'C', 0, 'U', 0, 'S', 0, 'B', 0,

  0x14,
  DESC_STRING,
  'U', 0, 'S', 0, 'B', 0, 'S', 0, 'e', 0, 'r', 0, 'i', 0, 'a', 0, 'l', 0,

  0x12,
  DESC_STRING,
  '1', 0, '2', 0, '3', 0, '4', 0, '5', 0, '6', 0, '7', 0, '8', 0,

// terminating zero
  0
};


void fifo_init(fifo_t *fifo, U8 *buf)
{
  fifo->head = 0;
  fifo->tail = 0;
  fifo->buf = buf;
}

BOOL fifo_put(fifo_t *fifo, U8 c)
{
  int next;

  // check if FIFO has room
  next = (fifo->head + 1) % VCOM_FIFO_SIZE;
  if (next == fifo->tail) {
    // full
    return FALSE;
  }

  fifo->buf[fifo->head] = c;
  fifo->head = next;

  return TRUE;
}

BOOL fifo_get(fifo_t *fifo, U8 *pc)
{
  int next;

  // check if FIFO has data
  if (fifo->head == fifo->tail) {
    return FALSE;
  }

  next = (fifo->tail + 1) % VCOM_FIFO_SIZE;

  *pc = fifo->buf[fifo->tail];
  fifo->tail = next;

  return TRUE;
}

int fifo_avail(fifo_t *fifo)
{
  return (VCOM_FIFO_SIZE + fifo->head - fifo->tail) % VCOM_FIFO_SIZE;
}

int fifo_free(fifo_t *fifo)
{
  return (VCOM_FIFO_SIZE - 1 - fifo_avail(fifo));
}

#ifdef USE_USB_LINE_CODING
void set_linecoding(TLineCoding linecoding)
{
  uint16_t baud;
  uint8_t mode;

  // set the baudrate
  baud = (uint16_t)((PCLK / ((linecoding.dwDTERate) * 16.0)) + 0.5);

  // set the number of characters and other
  // user specified operating parameters
  switch (linecoding.bCharFormat) {
    case 0: /* 1 stop bit */
      mode = ULCR_STOP_1;
      break;
    case 1: /* 1.5 stop bit (only with 5 bit character) */
    case 2: /* 2 stop bit */
      mode = ULCR_STOP_2;
      break;
    default:
      mode = ULCR_STOP_1;
      break;
  }
  switch (linecoding.bParityType) {
    case 0:  mode += ULCR_PAR_NO;
      break;
    case 1:  mode += ULCR_PAR_ODD;
      break;
    case 2:  mode += ULCR_PAR_EVEN;
      break;
    case 3:  mode += ULCR_PAR_MARK;
      break;
    case 4:  mode += ULCR_PAR_SPACE;
      break;
    default: mode += ULCR_PAR_NO;
      break;
  }
  switch (linecoding.bDataBits) {
    case 5:  mode += ULCR_CHAR_5;
      break;
    case 6:  mode += ULCR_CHAR_6;
      break;
    case 7:  mode += ULCR_CHAR_7;
      break;
    case 8:  mode += ULCR_CHAR_8;
      break;
    case 16:
    default: mode += ULCR_CHAR_8;
      break;
  }

#if USE_UART0
  U0LCR = ULCR_DLAB_ENABLE;             // select divisor latches
  U0DLL = (uint8_t)baud;                // set for baud low byte
  U0DLM = (uint8_t)(baud >> 8);         // set for baud high byte
  U0LCR = (mode & ~ULCR_DLAB_ENABLE);
#endif
#if USE_UART1
  U1LCR = ULCR_DLAB_ENABLE;             // select divisor latches
  U1DLL = (uint8_t)baud;                // set for baud low byte
  U1DLM = (uint8_t)(baud >> 8);         // set for baud high byte
  U1LCR = (mode & ~ULCR_DLAB_ENABLE);
#endif
}
#endif

#ifdef USE_USB_LINE_CODING
void VCOM_allow_linecoding(uint8_t mode)
{
  allow_line_coding = mode;
}
#endif

int VCOM_putchar(int c)
{
  return fifo_put(&txfifo, c) ? c : EOF;
}

int VCOM_getchar(void)
{
  int result;
  U8 c;

  result = fifo_get(&rxfifo, &c) ? c : EOF;

  if (BulkOut_is_blocked && fifo_free(&rxfifo) >= MAX_PACKET_SIZE) {
    disableIRQ();
    // get more data from usb bus
    BulkOut(BULK_OUT_EP, 0);
    BulkOut_is_blocked = false;
    enableIRQ();
  }

  return result;
}

bool VCOM_check_free_space(uint16_t len)
{
  return (fifo_free(&txfifo) >= len ? TRUE : FALSE);
}


int VCOM_check_available(void)
{
  return (fifo_avail(&rxfifo));
}


static void BulkOut(U8 bEP, U8 bEPStatus __attribute__((unused)))
{
  int i, iLen;

  if (fifo_free(&rxfifo) < MAX_PACKET_SIZE) {
    // may not fit into fifo
    BulkOut_is_blocked = true;
    return;
  }

  // get data from USB into intermediate buffer
  iLen = USBHwEPRead(bEP, abBulkBuf, sizeof(abBulkBuf));
  for (i = 0; i < iLen; i++) {
    // put into FIFO
    if (!fifo_put(&rxfifo, abBulkBuf[i])) {
      // overflow... :(
      ASSERT(FALSE);
      break;
    }
  }
}


static void BulkIn(U8 bEP, U8 bEPStatus __attribute__((unused)))
{
  int i, iLen;

  if (fifo_avail(&txfifo) == 0) {
    // no more data, disable further NAK interrupts until next USB frame
    USBHwNakIntEnable(0);
    return;
  }

  // get bytes from transmit FIFO into intermediate buffer
  for (i = 0; i < MAX_PACKET_SIZE; i++) {
    if (!fifo_get(&txfifo, &abBulkBuf[i])) {
      break;
    }
  }
  iLen = i;

  // send over USB
  if (iLen > 0) {
    USBHwEPWrite(bEP, abBulkBuf, iLen);
  }
}


static BOOL HandleClassRequest(TSetupPacket *pSetup, int *piLen, U8 **ppbData)
{
  switch (pSetup->bRequest) {

      // set line coding
    case SET_LINE_CODING:
      memcpy((U8 *)&LineCoding, *ppbData, 7);
      *piLen = 7;
#ifdef USE_USB_LINE_CODING
      if (allow_line_coding) {
        set_linecoding(LineCoding);
      }
#endif
      break;

      // get line coding
    case GET_LINE_CODING:
      *ppbData = (U8 *)&LineCoding;
      *piLen = 7;
      break;

      // set control line state
    case SET_CONTROL_LINE_STATE:
      // bit0 = DTR, bit1 = RTS
      break;

    default:
      return FALSE;
  }
  return TRUE;
}


static void USBIntHandler(void)
{
  USBHwISR();
  VICVectAddr = 0x00;    // dummy write to VIC to signal end of ISR
}


static void USBFrameHandler(U16 wFrame __attribute__((unused)))
{
  if (fifo_avail(&txfifo) > 0) {
    // data available, enable NAK interrupt on bulk in
    USBHwNakIntEnable(INACK_BI);
  }
}

// Periph with generic device API
struct usb_serial_periph usb_serial;

// Functions for the generic device API
static int usb_serial_check_free_space(struct usb_serial_periph *p __attribute__((unused)), long *fd __attribute__((unused)), uint16_t len)
{
  return (int)VCOM_check_free_space(len);
}

static void usb_serial_transmit(struct usb_serial_periph *p __attribute__((unused)), long fd __attribute__((unused)), uint8_t byte)
{
  VCOM_putchar(byte);
}

static void usb_serial_transmit_buffer(struct usb_serial_periph *p __attribute__((unused)), long fd __attribute__((unused)), uint8_t *data, uint16_t len)
{
  int i;
  for (i = 0; i < len; i++) {
    VCOM_putchar(data[i]);
  }
}

static void usb_serial_send(struct usb_serial_periph *p __attribute__((unused)), long fd __attribute__((unused))) { }

// Empty for lpc21
void VCOM_event(void) {}

// Empty for lpc21
void VCOM_send_message(void) {}

static int usb_serial_char_available(struct usb_serial_periph *p __attribute__((unused)))
{
  return VCOM_check_available();
}

static uint8_t usb_serial_getch(struct usb_serial_periph *p __attribute__((unused)))
{
  return (uint8_t)(VCOM_getchar());
}

void VCOM_init(void)
{
  // initialise stack
  USBInit();
#ifdef USE_USB_LINE_CODING
  // set default line coding
  set_linecoding(LineCoding);
#endif

  // register descriptors
  USBRegisterDescriptors(abDescriptors);

  // register class request handler
  USBRegisterRequestHandler(REQTYPE_TYPE_CLASS, HandleClassRequest, abClassReqData);

  // register endpoint handlers
  USBHwRegisterEPIntHandler(INT_IN_EP, NULL);
  USBHwRegisterEPIntHandler(BULK_IN_EP, BulkIn);
  USBHwRegisterEPIntHandler(BULK_OUT_EP, BulkOut);

  // register frame handler
  USBHwRegisterFrameHandler(USBFrameHandler);

  // enable bulk-in interrupts on NAKs
  USBHwNakIntEnable(INACK_BI);

  // initialise fifos
  fifo_init(&txfifo, txdata);
  fifo_init(&rxfifo, rxdata);

  // set up USB interrupt
  VICIntSelect &= ~VIC_BIT(VIC_USB);               // select IRQ for USB
  VICIntEnable = VIC_BIT(VIC_USB);

  _VIC_CNTL(USB_VIC_SLOT) = VIC_ENABLE | VIC_USB;
  _VIC_ADDR(USB_VIC_SLOT) = (uint32_t)USBIntHandler;

  // connect to bus
  USBHwConnect(TRUE);

  // Configure generic device
  usb_serial.device.periph = (void *)(&usb_serial);
  usb_serial.device.check_free_space = (check_free_space_t) usb_serial_check_free_space;
  usb_serial.device.put_byte = (put_byte_t) usb_serial_transmit;
  usb_serial.device.put_buffer = (put_buffer_t) usb_serial_transmit_buffer;
  usb_serial.device.send_message = (send_message_t) usb_serial_send;
  usb_serial.device.char_available = (char_available_t) usb_serial_char_available;
  usb_serial.device.get_byte = (get_byte_t) usb_serial_getch;
}