uart_arch.c File Reference

UART/Serial driver implementation for ChibiOS arch. More...

#include "mcu_periph/uart_arch.h"
#include <ch.h>
#include <hal.h>
#include "mcu_periph/gpio.h"
#include <BOARD_CONFIG>

Include dependency graph for uart_arch.c:

Go to the source code of this file.

Data Structures
struct	SerialInit

Functions
static void	handle_uart_rx (struct uart_periph *p)
	RX handler. More...
static void	handle_uart_tx (struct uart_periph *p)
	TX handler. More...
uint8_t	uart_getch (struct uart_periph *p)
void	uart_periph_set_baudrate (struct uart_periph *p, uint32_t baud)
	Set baudrate. More...
void	uart_periph_set_mode (struct uart_periph *p, bool tx_enabled, bool rx_enabled, bool hw_flow_control)
	Set mode (not necessary, or can be set by SerialConfig) More...
void	uart_periph_set_bits_stop_parity (struct uart_periph *p, uint8_t bits, uint8_t stop, uint8_t parity)
	Set parity and stop bits. More...
bool	uart_check_free_space (struct uart_periph *p, long *fd, uint16_t len)
void	uart_put_byte (struct uart_periph *p, long fd, uint8_t data)
	Uart transmit implementation. More...
void	uart_put_buffer (struct uart_periph *p, long fd, const uint8_t *data, uint16_t len)
	Uart transmit buffer implementation. More...
void	uart_send_message (struct uart_periph *p, long fd)

Detailed Description

UART/Serial driver implementation for ChibiOS arch.

ChibiOS has a high level Serial Driver, for Paparazzi it is more convenient than pure UART driver (which needs callbacks etc.). This implementation is asynchronous and the RX thread has to use event flags. See ChibiOS documen- tation.

Definition in file uart_arch.c.

---

Data Structure Documentation

struct SerialInit

Definition at line 43 of file uart_arch.c.

Data Fields
SerialConfig *	conf
mutex_t *	rx_mtx
semaphore_t *	rx_sem
mutex_t *	tx_mtx
semaphore_t *	tx_sem

Function Documentation

static void handle_uart_rx ( struct uart_periph *  p )

static

RX handler.

Definition at line 54 of file uart_arch.c.

References uart_periph::init_struct, uart_periph::reg_addr, uart_periph::rx_buf, uart_periph::rx_extract_idx, uart_periph::rx_insert_idx, SerialInit::rx_mtx, SerialInit::rx_sem, and UART_RX_BUFFER_SIZE.

static void handle_uart_tx ( struct uart_periph *  p )

static

TX handler.

Definition at line 75 of file uart_arch.c.

References uart_periph::init_struct, uart_periph::reg_addr, uart_periph::tx_buf, uart_periph::tx_extract_idx, uart_periph::tx_insert_idx, SerialInit::tx_mtx, uart_periph::tx_running, SerialInit::tx_sem, and UART_TX_BUFFER_SIZE.

bool uart_check_free_space	(	struct uart_periph *	p,
		long *	fd,
		uint16_t	len
	)

Definition at line 949 of file uart_arch.c.

Referenced by sdlogger_spi_direct_periodic(), send_buffer_to_uart(), and tunnel_event().

Here is the caller graph for this function:

uint8_t uart_getch

(

struct uart_periph *

p

)

Definition at line 840 of file uart_arch.c.

Referenced by airspeed_uADC_event(), dw1000_arduino_event(), esc32_event(), gps_piksi_read(), high_speed_logger_direct_memory_periodic(), hott_check_serial_data(), hott_common_decode_event(), hott_send_telemetry_data(), imu_um6_event(), periodic_switch_uart(), ReadGX3Buffer(), sbus_common_decode_event(), tunnel_event(), and vn200_read_buffer().

Here is the caller graph for this function:

void uart_periph_set_baudrate	(	struct uart_periph *	p,
		uint32_t	baud
	)

Set baudrate.

Definition at line 856 of file uart_arch.c.

Referenced by actuators_sbus_init(), gps_ubx_ucenter_autobaud(), gps_ubx_ucenter_configure(), hott_common_init(), px4flash_event(), sbus_common_init(), and uart_periph_init().

Here is the caller graph for this function:

void uart_periph_set_bits_stop_parity	(	struct uart_periph *	p,
		uint8_t	bits,
		uint8_t	stop,
		uint8_t	parity
	)

Set parity and stop bits.

Definition at line 885 of file uart_arch.c.

Referenced by actuators_sbus_init(), high_speed_logger_direct_memory_init(), hott_common_init(), and sbus_common_init().

Here is the caller graph for this function:

void uart_periph_set_mode	(	struct uart_periph *	p,
		bool	tx_enabled,
		bool	rx_enabled,
		bool	hw_flow_control
	)

Set mode (not necessary, or can be set by SerialConfig)

Definition at line 871 of file uart_arch.c.

Referenced by hott_enable_receiver(), and hott_enable_transmitter().

Here is the caller graph for this function:

void uart_put_buffer	(	struct uart_periph *	p,
		long	fd,
		const uint8_t *	data,
		uint16_t	len
	)

Uart transmit buffer implementation.

Definition at line 995 of file uart_arch.c.

void uart_put_byte	(	struct uart_periph *	p,
		long	fd,
		uint8_t	data
	)

Uart transmit implementation.

Definition at line 967 of file uart_arch.c.

Referenced by ahrs_gx3_align(), direct_memory_logger_periodic(), drop_ball(), esc32_periodic(), esc32_send(), gps_piksi_write(), hott_send_telemetry_data(), imu_gx3_init(), sdlogger_spi_direct_periodic(), send_buffer_to_uart(), tunnel_event(), uart_periph_init(), uart_put_buffer(), and UM6_send_packet().

Here is the caller graph for this function:

void uart_send_message	(	struct uart_periph *	p,
		long	fd
	)

Definition at line 1025 of file uart_arch.c.