imu_drotek_10dof_v2.h

Go to the documentation of this file.

/*
 * Copyright (C) 2013 Felix Ruess <felix.ruess@gmail.com>
 *
 * This file is part of paparazzi.
 *
 * paparazzi is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * paparazzi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with paparazzi; see the file COPYING.  If not, write to
 * the Free Software Foundation, 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */

#ifndef IMU_DROTEK_10DOF_V2_H
#define IMU_DROTEK_10DOF_V2_H

#include "std.h"
#include "generated/airframe.h"
#include "subsystems/imu.h"

#include "peripherals/mpu60x0_i2c.h"
#include "peripherals/hmc58xx.h"

#ifndef DROTEK_2_GYRO_RANGE
#define DROTEK_2_GYRO_RANGE MPU60X0_GYRO_RANGE_1000
#endif

#ifndef DROTEK_2_ACCEL_RANGE
#define DROTEK_2_ACCEL_RANGE MPU60X0_ACCEL_RANGE_8G
#endif

// Set default sensitivity based on range if needed
#if !defined IMU_GYRO_P_SENS & !defined IMU_GYRO_Q_SENS & !defined IMU_GYRO_R_SENS
#define IMU_GYRO_P_SENS MPU60X0_GYRO_SENS[DROTEK_2_GYRO_RANGE]
#define IMU_GYRO_P_SENS_NUM MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][0]
#define IMU_GYRO_P_SENS_DEN MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][1]
#define IMU_GYRO_Q_SENS MPU60X0_GYRO_SENS[DROTEK_2_GYRO_RANGE]
#define IMU_GYRO_Q_SENS_NUM MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][0]
#define IMU_GYRO_Q_SENS_DEN MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][1]
#define IMU_GYRO_R_SENS MPU60X0_GYRO_SENS[DROTEK_2_GYRO_RANGE]
#define IMU_GYRO_R_SENS_NUM MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][0]
#define IMU_GYRO_R_SENS_DEN MPU60X0_GYRO_SENS_FRAC[DROTEK_2_GYRO_RANGE][1]
#endif

// Set default sensitivity based on range if needed
#if !defined IMU_ACCEL_X_SENS & !defined IMU_ACCEL_Y_SENS & !defined IMU_ACCEL_Z_SENS
#define IMU_ACCEL_X_SENS MPU60X0_ACCEL_SENS[DROTEK_2_ACCEL_RANGE]
#define IMU_ACCEL_X_SENS_NUM MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][0]
#define IMU_ACCEL_X_SENS_DEN MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][1]
#define IMU_ACCEL_Y_SENS MPU60X0_ACCEL_SENS[DROTEK_2_ACCEL_RANGE]
#define IMU_ACCEL_Y_SENS_NUM MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][0]
#define IMU_ACCEL_Y_SENS_DEN MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][1]
#define IMU_ACCEL_Z_SENS MPU60X0_ACCEL_SENS[DROTEK_2_ACCEL_RANGE]
#define IMU_ACCEL_Z_SENS_NUM MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][0]
#define IMU_ACCEL_Z_SENS_DEN MPU60X0_ACCEL_SENS_FRAC[DROTEK_2_ACCEL_RANGE][1]
#endif



struct ImuDrotek2 {
  struct Mpu60x0_I2c mpu;
  struct Hmc58xx hmc;
};

extern struct ImuDrotek2 imu_drotek2;

extern void imu_drotek2_init(void);
extern void imu_drotek2_periodic(void);
extern void imu_drotek2_event(void);
extern bool imu_drotek2_configure_mag_slave(Mpu60x0ConfigSet mpu_set, void *mpu);

#endif /* IMU_DROTEK_10DOF_V2_H */