Example for airframe file

Add to your firmware section: This example contains all possible configuration options, not all of them are mandatory!

 <module name="gps_ublox"/>
 <module name="gps_ubx_i2c">
   <configure name="GPS_UBX_I2C_DEV" value="i2cX" />
 </module>

Module configuration options

Configure Options

name: GPS_UBX_I2C_DEV value: i2cX
Description: set i2c peripheral (default: i2c1)

Auto-loaded modules

The following modules are automatically loaded (just as if you had added them in the airframe file)

gps_ublox module

Dependencies

gps_ublox module

Module functions

Init Functions

These initialization functions are called once on startup.

gps_ubx_i2c_init()

Event Functions

These event functions are called in each cycle of the module event loop.

GpsUbxi2cEvent()

Periodic Functions

These functions are called periodically at the specified frequency from the module periodic loop.

gps_ubx_i2c_periodic()
- Frequency in Hz: 10.
- Autorun: LOCK
  Periodic function automatically starts after init and can't be stopped.

Files

Header Files

The following headers are automatically included in modules.h

gps_ubx_i2c.h

Source Files

modules/gps/gps_ubx_i2c.c

Raw gps_ubx_i2c.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="gps_ubx_i2c" dir="gps">
  <doc>
    <description>
      U-blox GPS (I2C)
      Extends the gps_ublox to provide I2C connectivity.
    </description>
    <configure name="GPS_UBX_I2C_DEV" value="i2cX" description="set i2c peripheral (default: i2c1)"/>
  </doc>
  <depends>gps_ublox</depends>
  <autoload name="gps_ublox"/>
  <header>
    <file name="gps_ubx_i2c.h"/>
  </header>
  <init fun="gps_ubx_i2c_init()"/>
  <periodic fun="gps_ubx_i2c_periodic()" freq="10."/>
  <event fun="GpsUbxi2cEvent()"/>
  <makefile target="ap">
    <configure name="GPS_UBX_I2C_DEV" default="i2c1" case="upper|lower"/>
    <define name="USE_$(GPS_UBX_I2C_DEV_UPPER)"/>
    <define name="GPS_UBX_I2C_DEV" value="$(GPS_UBX_I2C_DEV_LOWER)"/>
    <configure name="UBX_GPS_PORT" value="GPS_I2C"/>
    <define name="GPS_I2C"/>
    <define name="I2C_BUF_LEN" value="255"/>
    <file name="gps_ubx_i2c.c"/>
  </makefile>
</module>