Paparazzi UAS  v5.15_devel-230-gc96ce27
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
light_ws2812_arch.c
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2019 Xavier Paris <xavier.paris@enac.fr>
3  *
4  * This file is part of paparazzi
5  *
6  * paparazzi is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2, or (at your option)
9  * any later version.
10  *
11  * paparazzi is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with paparazzi; see the file COPYING. If not, see
18  * <http://www.gnu.org/licenses/>.
19  */
20 
29 /****************************************************************************************
30 https://github.com/joewa/WS2812-LED-Driver_ChibiOS/
31 ****************************************************************************************/
32 
33 #include <hal.h>
36 #include "mcu_periph/gpio.h"
37 
38 #include BOARD_CONFIG
39 
40 #define WS2812_SERVO_HZ 800000
41 #define WS2812_PWM_FREQUENCY (STM32_SYSCLK/2)
42 
43 #define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY/(1000000000/350))
44 #define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY/(1000000000/800))
45 
46 #define WS2812_RESET_BIT_N (50)
47 #define WS2812_COLOR_BIT_N (WS2812_NB_LEDS * 24)
48 #define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N)
49 
50 // Use driver 1 by default
51 #ifndef WS2812_CFG_DEF
52 #define WS2812_GPIO WS2812D1_GPIO
53 #define WS2812_PIN WS2812D1_PIN
54 #define WS2812_AF WS2812D1_AF
55 #define WS2812_CFG_DEF WS2812D1_CFG_DEF
56 #endif
57 
58 #define WS2812_DMA_IRQ_PRIORITY 6
59 
63 typedef struct {
68  PWMDriver *pwmp;
69 } WS2812Config;
70 
71 // Config from board conf
73 
77 typedef struct {
80  PWMConfig pwm_conf;
83 } WS2812Driver;
84 
85 // Driver
87 
89 {
90 
92 
93  uint32_t i;
94  for (i = 0; i < WS2812_COLOR_BIT_N; i++) {
95  WS2812D.buf[i] = WS2812_DUTYCYCLE_0;
96  }
97  for (i = 0; i < WS2812_RESET_BIT_N; i++) {
98  WS2812D.buf[i + WS2812_COLOR_BIT_N] = 0;
99  }
100 
101  WS2812D.config = &WS2812CFG;
102 
103  WS2812D.dma_conf = (DMAConfig) {
104  .stream = WS2812CFG.dma_stream,
105  .channel = WS2812CFG.dma_channel,
106  .dma_priority = WS2812CFG.dma_priority,
107  .irq_priority = WS2812_DMA_IRQ_PRIORITY,
108  .direction = DMA_DIR_M2P,
109  .psize = 4,
110  .msize = 4,
111  .inc_peripheral_addr = false,
112  .inc_memory_addr = true,
113  .circular = true,
114  .error_cb = NULL,
115  .end_cb = NULL,
116  .pburst = 0,
117  .mburst = 0,
118  .fifo = 0
119  };
120 
121  WS2812D.pwm_conf = (PWMConfig) {
122  .frequency = WS2812_PWM_FREQUENCY,
124  .callback = NULL,
125  .channels = {
126  {
127  .mode = PWM_OUTPUT_DISABLED,
128  .callback = NULL
129  },
130  {
131  .mode = PWM_OUTPUT_DISABLED,
132  .callback = NULL
133  },
134  {
135  .mode = PWM_OUTPUT_DISABLED,
136  .callback = NULL
137  },
138  {
139  .mode = PWM_OUTPUT_DISABLED,
140  .callback = NULL
141  },
142  },
143  .cr2 = 0,
144  .dier = STM32_TIM_DIER_UDE
145  };
146 
147  dmaObjectInit(&WS2812D.dmap);
148  dmaStart(&WS2812D.dmap, &WS2812D.dma_conf);
149  dmaStartTransfert(&WS2812D.dmap, &(WS2812D.config->pwmp->tim->CCR[WS2812D.config->pwm_channel]), &WS2812D.buf, WS2812_BIT_N);
150 
151  WS2812D.pwm_conf.channels[WS2812D.config->pwm_channel].mode = PWM_OUTPUT_ACTIVE_HIGH;
152  pwmStart(WS2812D.config->pwmp, &WS2812D.pwm_conf);
153  pwmEnableChannel(WS2812D.config->pwmp, WS2812D.config->pwm_channel, 0);
154 }
155 
156 #define WS2812_BIT(led, byte, bit) (24*(led) + 8*(byte) + (7 - (bit)))
157 #define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit))
158 #define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit))
159 #define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
160 
162 {
163  uint32_t bit;
164  if (led_number < WS2812_NB_LEDS) {
165  for (bit = 0; bit < 8; bit++) {
166  WS2812D.buf[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
167  WS2812D.buf[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
168  WS2812D.buf[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
169  }
170  }
171 }
void gpio_setup_pin_af(ioportid_t port, uint16_t pin, uint8_t af, bool is_output)
Setup a gpio for input or output with alternate function.
Definition: gpio_arch.c:61
#define WS2812_CFG_DEF
STM32 DMA subsystem driver header.
#define WS2812_BIT_N
bool dmaStart(DMADriver *dmap, const DMAConfig *cfg)
Configures and activates the DMA peripheral.
Definition: hal_stm32_dma.c:85
static WS2812Driver WS2812D
Some architecture independent helper functions for GPIOs.
#define WS2812_RED_BIT(led, bit)
DMAConfig dma_conf
uint32_t stream
stream associated with transaction
uint8_t dma_priority
static WS2812Config WS2812CFG
Configuration structure.
void light_ws2812_arch_set(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b)
set color RGB color of one led
#define WS2812_GPIO
#define WS2812_DUTYCYCLE_1
DMA stream configuration structure.
PWMDriver * pwmp
#define WS2812_BLUE_BIT(led, bit)
Driver structure.
const WS2812Config * config
unsigned long uint32_t
Definition: types.h:18
#define WS2812_SERVO_HZ
#define WS2812_GREEN_BIT(led, bit)
#define WS2812_PIN
ws2812 driver based on ChibiOS
#define WS2812_NB_LEDS
Number of LEDs.
MEMORY to PERIPHERAL.
Definition: hal_stm32_dma.h:84
#define WS2812_DUTYCYCLE_0
bool dmaStartTransfert(DMADriver *dmap, volatile void *periphp, void *mem0p, const size_t size)
Starts a DMA transaction.
unsigned char uint8_t
Definition: types.h:14
#define WS2812_PWM_FREQUENCY
void dmaObjectInit(DMADriver *dmap)
Definition: hal_stm32_dma.c:53
uint32_t buf[WS2812_BIT_N+1]
#define WS2812_COLOR_BIT_N
PWMConfig pwm_conf
uint32_t dma_stream
#define WS2812_AF
#define WS2812_RESET_BIT_N
void light_ws2812_arch_init(void)
Structure representing a DMA driver.
#define WS2812_DMA_IRQ_PRIORITY