Paparazzi UAS  v5.12_stable-4-g9b43e9b
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
nav_bungee_takeoff module

Takeoff functions for bungee takeoff.

Run initialize function when the plane is on the bungee, the bungee is fully extended and you are ready to launch the plane. After initialized, the plane will follow a line drawn by the position of the plane on initialization and the position of the bungee (given in the arguments). Once the plane crosses the throttle line, which is perpendicular to the line the plane is following, and intersects the position of the bungee (plus or minus a fixed distance (BUNGEE_TAKEOFF_DISTANCE in airframe file) from the bungee just in case the bungee doesn't release exactly above the bungee) the prop will come on. The plane will then continue to follow the line until it has reached a specific height (defined in as BUNGEE_TAKEOFF_HEIGHT in airframe file) above the bungee waypoint and airspeed (defined as BUNGEE_TAKEOFF_AIRSPEED in the airframe file). The airspeed limit is only used if USE_AIRSPEED flag is defined or set to true (and assuming the airspeed is then available). It is also possible to specify the pitch angle (BUNGEE_TAKEOFF_PITCH) and the throttle (BUNGEE_TAKEOFF_THROTTLE, between 0 and 1).

Example for airframe file

Add to your firmware section:

1 <module name="nav_bungee_takeoff"/>

Module configuration options

Airframe file section

  • section name: BUNGEE prefix: BUNGEE_TAKEOFF_
    • name HEIGHT value: distance
      Description: Takeoff height
    • name AIRSPEED value: airspeed
      Description: Procedures ends above this airspeed (and above HEIGHT). Only works with valid airspeed data and USE_AIRSPEED flag
    • name DISTANCE value: distance
      Description: After this distance, the throttle is activated (if above MIN_SPEED)
    • name MIN_SPEED value: speed
      Description: Throttle is activated if crossing the line above this speed
    • name PITCH value: angle
      Description: Pitch angle during the complete takeoff phase
    • name THROTTLE value: throttle
      Description: Throttle setpoint (between 0 and 1) used after crossing the throttle line

Files

Header Files

The following headers are automatically included in modules.h

Source Files

Raw nav_bungee_takeoff.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="nav_bungee_takeoff" dir="nav">
<doc>
<description>
Takeoff functions for bungee takeoff.
Run initialize function when the plane is on the bungee, the bungee is fully extended and you are ready to launch the plane.
After initialized, the plane will follow a line drawn by the position of the plane on initialization and the position of the bungee (given in the arguments).
Once the plane crosses the throttle line, which is perpendicular to the line the plane is following, and intersects the position of the bungee (plus or minus a fixed distance (BUNGEE_TAKEOFF_DISTANCE in airframe file) from the bungee just in case the bungee doesn't release exactly above the bungee) the prop will come on.
The plane will then continue to follow the line until it has reached a specific height (defined in as BUNGEE_TAKEOFF_HEIGHT in airframe file) above the bungee waypoint and airspeed (defined as BUNGEE_TAKEOFF_AIRSPEED in the airframe file). The airspeed limit is only used if USE_AIRSPEED flag is defined or set to true (and assuming the airspeed is then available). It is also possible to specify the pitch angle (BUNGEE_TAKEOFF_PITCH) and the throttle (BUNGEE_TAKEOFF_THROTTLE, between 0 and 1).
</description>
<section name="BUNGEE" prefix="BUNGEE_TAKEOFF_">
<define name="HEIGHT" value="distance" unit="m" description="Takeoff height"/>
<define name="AIRSPEED" value="airspeed" unit="m/s" description="Procedures ends above this airspeed (and above HEIGHT). Only works with valid airspeed data and USE_AIRSPEED flag"/>
<define name="DISTANCE" value="distance" unit="m" description="After this distance, the throttle is activated (if above MIN_SPEED)"/>
<define name="MIN_SPEED" value="speed" unit="m/s" description="Throttle is activated if crossing the line above this speed"/>
<define name="PITCH" value="angle" unit="deg" description="Pitch angle during the complete takeoff phase"/>
<define name="THROTTLE" value="throttle" unit="normalized" description="Throttle setpoint (between 0 and 1) used after crossing the throttle line"/>
</section>
</doc>
<header>
<file name="nav_bungee_takeoff.h"/>
</header>
<makefile target="ap|sim|nps">
<file name="nav_bungee_takeoff.c"/>
</makefile>
</module>