Paparazzi UAS  v5.12_stable-4-g9b43e9b
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
mag_hmc5843 module

hmc5843 magnetometer

No detailed description...

Example for airframe file

Add to your firmware section: This example contains all possible configuration options, not all of them are mandatory!

1 <module name="mag_hmc5843">
2  <configure name="HMC5843_I2C_DEV" value="i2cX" />
3 </module>

Module configuration options

Configure Options

  • name: HMC5843_I2C_DEV value: i2cX
    Description: select which i2c peripheral to use (default i2c0)

Module functions

Init Functions

These initialization functions are called once on startup.

Event Functions

These event functions are called in each cycle of the module event loop.

Periodic Functions

These functions are called periodically at the specified frequency from the module periodic loop.

  • hmc5843_module_periodic()
    • Frequency in Hz: 60
    • Autorun: LOCK
      Periodic function automatically starts after init and can't be stopped.


Header Files

The following headers are automatically included in modules.h

Source Files

Raw mag_hmc5843.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="sensors">
<description>hmc5843 magnetometer</description>
<configure name="HMC5843_I2C_DEV" value="i2cX" description="select which i2c peripheral to use (default i2c0)"/>
<file name="mag_hmc5843.h"/>
<init fun="hmc5843_module_init()"/>
<periodic fun="hmc5843_module_periodic()" freq="60"/>
<event fun="hmc5843_module_event()"/>
<configure name="HMC5843_I2C_DEV" default="i2c0" case="upper|lower"/>
<define name="USE_$(HMC5843_I2C_DEV_UPPER)"/>
<define name="HMC5843_I2C_DEV" value="$(HMC5843_I2C_DEV_LOWER)"/>
<file name="mag_hmc5843.c"/>
<file name="hmc5843.c" dir="peripherals"/>
<define name="HMC5843_NO_IRQ"/>