Paparazzi UAS  v5.12_stable-4-g9b43e9b
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
nps_radio_control_joystick.c File Reference

Direct RC control for NPS with a standard joystick using SDL. More...

#include "nps_radio_control.h"
#include "nps_radio_control_joystick.h"
#include "generated/airframe.h"
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <SDL/SDL.h>
+ Include dependency graph for nps_radio_control_joystick.c:

Go to the source code of this file.

Macros

#define NPS_JS_AXIS_ROLL   0
 
#define NPS_JS_AXIS_PITCH   1
 
#define NPS_JS_AXIS_YAW   2
 
#define NPS_JS_AXIS_THROTTLE   3
 
#define JS_NB_AXIS   4
 
#define NPS_JS_BUTTON_MODE_MANUAL   1
 
#define NPS_JS_BUTTON_MODE_AUTO1   2
 
#define NPS_JS_BUTTON_MODE_AUTO2   3
 
#define JS_NB_BUTTONS   3
 

Functions

int nps_radio_control_joystick_init (const char *device)
 Initializes SDL and the joystick. More...
 
void nps_radio_control_joystick_update (void)
 Updates joystick buttons from events, directly reads current axis positions. More...
 

Variables

struct NpsJoystick nps_joystick
 
SDL_Joystick * sdl_joystick
 
SDL_Event sdl_event
 

Detailed Description

Direct RC control for NPS with a standard joystick using SDL.

Simple DirectMedia Layer library is used for cross-platform support. Joystick button and axes are mapped to RC commands directly with defines.

You must have a joystick with either:

  • 4 axes and 3 buttons, or
  • 5 axes

First you should run sw/ground_segment/joystick/test_stick to determine the indices of the physical axes and buttons on your joystick (and to test that it actually works). Then you can assign each axis and button to a command in your airframe file.

The default axes are Roll = 0, Pitch = 1, Yaw = 2 and Throttle = 3. The default buttons are Manual = 0, Auto1 = 1, Auto2 = 2.

Example for 4 axes and 3 buttons using a joystick with 7 axes and 5 buttons:

*    <section name="SIMULATOR" prefix="NPS_">
*      ...
*      <define name="JS_AXIS_ROLL" value="2"/> <!-- Use joystick axis 2 for roll -->
*      <!-- Use joystick axis 1 for pitch (default) -->
*      <define name="JS_AXIS_YAW" value="3"/> <!-- Use joystick axis 3 for yaw -->
*      <define name="JS_AXIS_ROLL" value="6"/> <!-- Use joystick axis 6 for throttle -->
*      <define name="JS_BUTTON_MODE_MANUAL" value="3"/> <!-- Use joystick button 3 for manual -->
*      <!-- Use joystick button 1 for auto1 (default) -->
*      <!-- Use joystick button 2 for auto2 (default) -->
*    </section>
*  

One can define NPS_JS_AXIS_MODE to use an axis instead of buttons to change You will need a 5-axis joystick.

If you need to reverse the direction of any axis, simply use:

*      <define name="JS_AXIS_PITCH_REVERSE" value="1"/>
*      <!-- value="1" is required, setting to zero or omitting disables reversing -->
*  

At this point, no other functionality or channels are supported for R/C control.

Definition in file nps_radio_control_joystick.c.

Macro Definition Documentation

#define JS_NB_AXIS   4

Definition at line 95 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_init().

#define JS_NB_BUTTONS   3

Definition at line 112 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_init().

#define NPS_JS_AXIS_PITCH   1

Definition at line 85 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_AXIS_ROLL   0

Definition at line 82 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_AXIS_THROTTLE   3

Definition at line 91 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_AXIS_YAW   2

Definition at line 88 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_BUTTON_MODE_AUTO1   2

Definition at line 105 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_BUTTON_MODE_AUTO2   3

Definition at line 108 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

#define NPS_JS_BUTTON_MODE_MANUAL   1

Definition at line 102 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

Function Documentation

int nps_radio_control_joystick_init ( const char *  device)

Initializes SDL and the joystick.

Function exits with -1 if fails

Parameters
devicestring integer of desired joystick device
Returns
0 on success

Definition at line 130 of file nps_radio_control_joystick.c.

References JS_NB_AXIS, JS_NB_BUTTONS, NpsJoystick::mode, MODE_SWITCH_AUTO2, nps_joystick, NpsJoystick::pitch, NpsJoystick::roll, sdl_joystick, NpsJoystick::throttle, and NpsJoystick::yaw.

Referenced by nps_radio_control_init().

+ Here is the caller graph for this function:

void nps_radio_control_joystick_update ( void  )

Variable Documentation

SDL_Event sdl_event

Definition at line 119 of file nps_radio_control_joystick.c.

Referenced by nps_radio_control_joystick_update().

SDL_Joystick* sdl_joystick