Paparazzi UAS  v5.12_stable-4-g9b43e9b
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
usb_serial_stm32_example2 module

STM32 USB-serial example.

Example of USB-serial module on STM32 architecture, using libopencm3 library. This example tests the capability of USB-serial port by sending a lots of data. To be used with Lisa M/MX 2.1

Example for airframe file

Add to your firmware section:

1 <module name="usb_serial_stm32_example2"/>

Module functions

Init Functions

These initialization functions are called once on startup.

Event Functions

These event functions are called in each cycle of the module event loop.

Periodic Functions

These functions are called periodically at the specified frequency from the module periodic loop.

  • periodic_usb_serial()
    • Frequency in Hz: 10.
    • Autorun: TRUE
      Periodic function automatically starts after init.

Files

Header Files

The following headers are automatically included in modules.h

Source Files

Raw usb_serial_stm32_example2.xml file:

<!DOCTYPE module SYSTEM "module.dtd">
<module name="usb_serial_stm32_example1" dir="com">
<doc>
<description>
STM32 USB-serial example.
Example of USB-serial module on STM32 architecture, using libopencm3 library.
This example tests the capability of USB-serial port by sending a lots of data.
To be used with Lisa M/MX 2.1
</description>
</doc>
<header>
<file name="usb_serial_stm32.h"/>
</header>
<init fun="init_usb_serial()"/>
<periodic fun="periodic_usb_serial()" freq="10." autorun="TRUE"/>
<event fun="event_usb_serial()"/>
<makefile target="!nps|sim">
<file_arch name="usb_ser_hw.c" dir=""/>
<define name="USE_USB_SERIAL"/>
<file name="usb_serial_stm32_example2.c"/>
</makefile>
</module>