The International Micro-Air Vehicle Conference and Competition was held last week in Beijing, China, organized by the Beijing Institute of Technology and the National University of Singapore.

As usual, the level of the teams involved in the competition is higher year after year and we had a great show. The team from the MAVLAB of TUDelft was participating to both indoor and outdoor session. During the outdoor, they unfortunately couldn’t show their best due to many communication issues, preventing them to fully use their RTK Bebop2 (and also some regressions in Paparazzi code, hum hum… :( ).

DELFTACOPTER, an electric, long range, transitioning autonomous delta-wing helicopter, is on a mission. What mission? In this case, it’s the 2016 Outback Medical Express challenge and the MAVLab Team at TUDelft has high hopes for their hybrid aircraft.

This year’s Outback Medical Express mission requires a UAV to pick up and bring back a blood sample of an ill-fated person called “Outback Joe” located at an inaccessible roughly known location 30 kilometer away remote location with unknown terrain.

We will be at DefCon 24. A yearly hacker conference in Las Vegas, Nevada. If you are there make sure to say hi. To get in touch just send a mention or private message to @paparazziuav on twitter or a contact us in our Gitter Discuss channel.

1BitSquared will be there selling their hardware. If you are interested send them a message to @1bitsquared on twitter. They will have Elle0, Lisa/S, Lisa/MX, Lisa/M autopilots for sale as well as Lisa/S starter kits and Quad Kits. The new Black Magic Probe v2 programming and debugging adapter will be available at the Hacker Warehouse in the Vendor area.

Some time ago, I found my old Game Boy at my parents’ house. So the first thing that came to my mind was: can I fly a drone with this ? (and also where is my Mario Bros cartridge).

So I spend some time searching the web to see if I could find some idea to solve my problem. And if it seems that piloting unmanned aircraft with a Game Boy is not so common, you can find everything you need to program it!

Last May, the ISARRA conference (International Society for Atmospheric Research using Remotely Piloted Aircraft) was held in Toulouse, France (http://www.meteo.fr/cic/meetings/2016/isarra/).

The week before the conference, a few teams of researchers gathered to share experiences and fly their drones at the Atmospheric Research Center of Lannemezan near the Pyrenees. Among them was some of the oldest users of Paparazzi: Martin Muller (http://blog.pfump.org), the team of Joachim Reuder from the Geophysical Institute of Bergen, the UAV Lab of ENAC and the French Meteorological Research Center who was hosting the event.

For those of us that use Paparazzi to fly multiple MAVs, the current GCS does a great job of managing and presenting just the right amount of information for safe flight. That being said, there’s always room for new tools. It’s my pleasure to introduce the Flying Robot Commander, a PPRZLINK enabled web application for managing multiple MAVs.

The Flying Robot Commander(FRC) is a Flask/python based RESTful web application that integrates with Paparazzi UAV via PPRZLINK. That’s right, you can now write python code to access/extend Paparazzi UAV capabilities (NOTE: one of the main complaints about the current Paparazzi GCS is that it’s written in ocaml). In addition to python, PPRZLINK also provides C and ocaml libraries for those that need them.

Dear Paparazzians,

I made a new video describing the details of the G0 Paparazzi UAV GPS receiver module. In the video I go through and describe the several design decisions we made to ensure high Signal to Noise Ratio, good multi path GPS signal rejection and overall reliability of the GPS for use in airborne robotics applications.

I hope this video is helpful. If you think so too please let me know in the YouTube comments. If you enjoyed the video make sure to like it on YouTube and subscribe to the channel.

Dear Paparazzians,

I made a new video describing the details of the Elle0 Paparazzi UAV autopilot. Elle0 is now available for purchase in the 1BitSquared store together with the G0 companion GPS receiver. In the video I go through and describe every IO pin as well as some of the design differences to the Lisa/MX Autopilot. Additionally, I describe how you can add a battery voltage monitor to your Elle0 using a voltage divider circuit.

Hi all Open-Source enthusiasts,

Today we are happy to announce we’ll be adding an extra autopilot board to there long list of supported autopilots.

The Pixhawk autopilot board will be integrated in our next software release! The video shows the first flight with Paparazzi UAV on a Pixhawk, more videos will follow.

Why choose Paparazzi UAV?

If you are looking for an advanced, modular open-source autopilot which has features others can only dream of, you choose Paparazzi UAV.

1BitSquared has just launched their German online store. This is the first dedicated Paparazzi UAV hardware supplier in Europe.

With a store in Europe they can provide faster delivery times of Paparazzi UAV hardware for all the European users and developers. Now you can purchase Lisa/M(X), Lisa/S, Elle0 autopilots and accessories for Paparazzi UAV within Europe without having to pick up your order at your customs office. We hope this will make the entry into Paparazzi and working with the system easier, knowing that you can get new parts and hardware faster from a local supplier.