Paparazzi UAS  v5.0.5_stable-7-g4b8bbb7
Paparazzi is a free software Unmanned Aircraft System.
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Modules Pages
lisa_l_1.0.h File Reference

Go to the source code of this file.

Macros

#define BOARD_LISA_L
 
#define EXT_CLK   8000000
 
#define AHB_CLK   72000000
 
#define USE_LED_1   1
 
#define LED_STP08
 
#define POWER_SWITCH_LED   5
 
#define SPI_SELECT_SLAVE0_PERIPH   RCC_APB2ENR_IOPAEN
 
#define SPI_SELECT_SLAVE0_PORT   GPIOA
 
#define SPI_SELECT_SLAVE0_PIN   GPIO15
 
#define SPI_SELECT_SLAVE1_PERIPH   RCC_APB2ENR_IOPAEN
 
#define SPI_SELECT_SLAVE1_PORT   GPIOA
 
#define SPI_SELECT_SLAVE1_PIN   GPIO4
 
#define SPI_SELECT_SLAVE2_PERIPH   RCC_APB2ENR_IOPBEN
 
#define SPI_SELECT_SLAVE2_PORT   GPIOB
 
#define SPI_SELECT_SLAVE2_PIN   GPIO12
 
#define SPI_SELECT_SLAVE3_PERIPH   RCC_APB2ENR_IOPCEN
 
#define SPI_SELECT_SLAVE3_PORT   GPIOC
 
#define SPI_SELECT_SLAVE3_PIN   GPIO13
 
#define SPI_SELECT_SLAVE4_PERIPH   RCC_APB2ENR_IOPCEN
 
#define SPI_SELECT_SLAVE4_PORT   GPIOC
 
#define SPI_SELECT_SLAVE4_PIN   GPIO12
 
#define I2C1_GPIO_PORT   GPIOB
 
#define I2C1_GPIO_SCL   GPIO6
 
#define I2C1_GPIO_SDA   GPIO7
 
#define I2C2_GPIO_PORT   GPIOB
 
#define I2C2_GPIO_SCL   GPIO10
 
#define I2C2_GPIO_SDA   GPIO11
 
#define UART1_GPIO_AF   0
 
#define UART1_GPIO_PORT_RX   GPIO_BANK_USART1_RX
 
#define UART1_GPIO_RX   GPIO_USART1_RX
 
#define UART1_GPIO_PORT_TX   GPIO_BANK_USART1_TX
 
#define UART1_GPIO_TX   GPIO_USART1_TX
 
#define UART2_GPIO_AF   0
 
#define UART2_GPIO_PORT_RX   GPIO_BANK_USART2_RX
 
#define UART2_GPIO_RX   GPIO_USART2_RX
 
#define UART2_GPIO_PORT_TX   GPIO_BANK_USART2_TX
 
#define UART2_GPIO_TX   GPIO_USART2_TX
 
#define UART3_GPIO_AF   AFIO_MAPR_USART3_REMAP_PARTIAL_REMAP
 
#define UART3_GPIO_PORT_RX   GPIO_BANK_USART3_PR_RX
 
#define UART3_GPIO_RX   GPIO_USART3_PR_RX
 
#define UART3_GPIO_PORT_TX   GPIO_BANK_USART3_PR_TX
 
#define UART3_GPIO_TX   GPIO_USART3_PR_TX
 
#define UART5_GPIO_AF   0
 
#define UART5_GPIO_PORT_RX   GPIO_BANK_UART5_RX
 
#define UART5_GPIO_RX   GPIO_UART5_RX
 
#define UART5_GPIO_PORT_TX   GPIO_BANK_UART5_TX
 
#define UART5_GPIO_TX   GPIO_UART5_TX
 
#define SPEKTRUM_BIND_PIN   GPIO3
 
#define SPEKTRUM_BIND_PIN_PORT   GPIOC
 
#define SPEKTRUM_UART1_RCC_REG   &RCC_APB2ENR
 
#define SPEKTRUM_UART1_RCC_DEV   RCC_APB2ENR_USART1EN
 
#define SPEKTRUM_UART1_BANK   GPIO_BANK_USART1_RX
 
#define SPEKTRUM_UART1_PIN   GPIO_USART1_RX
 
#define SPEKTRUM_UART1_AF   0
 
#define SPEKTRUM_UART1_IRQ   NVIC_USART1_IRQ
 
#define SPEKTRUM_UART1_ISR   usart1_isr
 
#define SPEKTRUM_UART1_DEV   USART1
 
#define SPEKTRUM_UART3_RCC_REG   &RCC_APB1ENR
 
#define SPEKTRUM_UART3_RCC_DEV   RCC_APB1ENR_USART3EN
 
#define SPEKTRUM_UART3_BANK   GPIO_BANK_USART3_PR_RX
 
#define SPEKTRUM_UART3_PIN   GPIO_USART3_PR_RX
 
#define SPEKTRUM_UART3_AF   AFIO_MAPR_USART3_REMAP_PARTIAL_REMAP
 
#define SPEKTRUM_UART3_IRQ   NVIC_USART3_IRQ
 
#define SPEKTRUM_UART3_ISR   usart3_isr
 
#define SPEKTRUM_UART3_DEV   USART3
 
#define SPEKTRUM_UART5_RCC_REG   &RCC_APB1ENR
 
#define SPEKTRUM_UART5_RCC_DEV   RCC_APB1ENR_UART5EN
 
#define SPEKTRUM_UART5_BANK   GPIO_BANK_UART5_RX
 
#define SPEKTRUM_UART5_PIN   GPIO_UART5_RX
 
#define SPEKTRUM_UART5_AF   0
 
#define SPEKTRUM_UART5_IRQ   NVIC_UART5_IRQ
 
#define SPEKTRUM_UART5_ISR   uart5_isr
 
#define SPEKTRUM_UART5_DEV   UART5
 
#define USE_PPM_TIM2   1
 
#define PPM_CHANNEL   TIM_IC2
 
#define PPM_TIMER_INPUT   TIM_IC_IN_TI2
 
#define PPM_IRQ   NVIC_TIM2_IRQ
 
#define PPM_CC_IE   TIM_DIER_CC2IE
 
#define PPM_CC_IF   TIM_SR_CC2IF
 
#define PPM_GPIO_PORT   GPIOA
 
#define PPM_GPIO_PIN   GPIO1
 
#define PPM_GPIO_AF   0
 
#define USE_AD1   1
 
#define USE_AD1_1   1
 
#define USE_AD1_2   1
 
#define USE_AD1_3   1
 
#define USE_AD1_4   1
 
#define USE_AD_TIM1   1
 
#define ADC_CHANNEL_VSUPPLY   2
 
#define DefaultVoltageOfAdc(adc)   (0.0059*adc)
 
#define BOARD_ADC_CHANNEL_1   8
 
#define BOARD_ADC_CHANNEL_2   9
 
#define BOARD_ADC_CHANNEL_3   0
 
#define BOARD_ADC_CHANNEL_4   15
 
#define BOARD_HAS_BARO   1
 
#define DEFAULT_ACTUATORS   "subsystems/actuators/actuators_pwm.h"
 
#define ActuatorDefaultSet(_x, _y)   ActuatorPwmSet(_x,_y)
 
#define ActuatorsDefaultInit()   ActuatorsPwmInit()
 
#define ActuatorsDefaultCommit()   ActuatorsPwmCommit()
 
#define PWM_USE_TIM3   1
 
#define PWM_USE_TIM4   1
 
#define USE_PWM1   1
 
#define USE_PWM2   1
 
#define USE_PWM3   1
 
#define USE_PWM4   1
 
#define USE_PWM5   1
 
#define USE_PWM6   1
 
#define ACTUATORS_PWM_NB   6
 
#define PWM_SERVO_1   0
 
#define PWM_SERVO_1_TIMER   TIM3
 
#define PWM_SERVO_1_RCC_IOP   RCC_APB2ENR_IOPCEN
 
#define PWM_SERVO_1_GPIO   GPIOC
 
#define PWM_SERVO_1_PIN   GPIO6
 
#define PWM_SERVO_1_AF   0
 
#define PWM_SERVO_1_OC   TIM_OC1
 
#define PWM_SERVO_1_OC_BIT   (1<<0)
 
#define PWM_SERVO_2   1
 
#define PWM_SERVO_2_TIMER   TIM3
 
#define PWM_SERVO_2_RCC_IOP   RCC_APB2ENR_IOPCEN
 
#define PWM_SERVO_2_GPIO   GPIOC
 
#define PWM_SERVO_2_PIN   GPIO7
 
#define PWM_SERVO_2_AF   0
 
#define PWM_SERVO_2_OC   TIM_OC2
 
#define PWM_SERVO_2_OC_BIT   (1<<1)
 
#define PWM_SERVO_3   2
 
#define PWM_SERVO_3_TIMER   TIM3
 
#define PWM_SERVO_3_RCC_IOP   RCC_APB2ENR_IOPCEN
 
#define PWM_SERVO_3_GPIO   GPIOC
 
#define PWM_SERVO_3_PIN   GPIO8
 
#define PWM_SERVO_3_AF   0
 
#define PWM_SERVO_3_OC   TIM_OC3
 
#define PWM_SERVO_3_OC_BIT   (1<<2)
 
#define PWM_SERVO_4   3
 
#define PWM_SERVO_4_TIMER   TIM3
 
#define PWM_SERVO_4_RCC_IOP   RCC_APB2ENR_IOPCEN
 
#define PWM_SERVO_4_GPIO   GPIOC
 
#define PWM_SERVO_4_PIN   GPIO9
 
#define PWM_SERVO_4_AF   0
 
#define PWM_SERVO_4_OC   TIM_OC4
 
#define PWM_SERVO_4_OC_BIT   (1<<3)
 
#define PWM_SERVO_5   4
 
#define PWM_SERVO_5_TIMER   TIM4
 
#define PWM_SERVO_5_RCC_IOP   RCC_APB2ENR_IOPBEN
 
#define PWM_SERVO_5_GPIO   GPIOB
 
#define PWM_SERVO_5_PIN   GPIO8
 
#define PWM_SERVO_5_AF   0
 
#define PWM_SERVO_5_OC   TIM_OC3
 
#define PWM_SERVO_5_OC_BIT   (1<<2)
 
#define PWM_SERVO_6   5
 
#define PWM_SERVO_6_TIMER   TIM4
 
#define PWM_SERVO_6_RCC_IOP   RCC_APB2ENR_IOPBEN
 
#define PWM_SERVO_6_GPIO   GPIOB
 
#define PWM_SERVO_6_PIN   GPIO9
 
#define PWM_SERVO_6_AF   0
 
#define PWM_SERVO_6_OC   TIM_OC4
 
#define PWM_SERVO_6_OC_BIT   (1<<3)
 
#define PWM_TIM3_CHAN_MASK   (PWM_SERVO_1_OC_BIT|PWM_SERVO_2_OC_BIT|PWM_SERVO_3_OC_BIT|PWM_SERVO_4_OC_BIT)
 
#define PWM_TIM4_CHAN_MASK   (PWM_SERVO_5_OC_BIT|PWM_SERVO_6_OC_BIT)
 

Macro Definition Documentation

#define ActuatorDefaultSet (   _x,
  _y 
)    ActuatorPwmSet(_x,_y)

Definition at line 164 of file lisa_l_1.0.h.

#define ACTUATORS_PWM_NB   6

Definition at line 182 of file lisa_l_1.0.h.

#define ActuatorsDefaultCommit ( )    ActuatorsPwmCommit()

Definition at line 166 of file lisa_l_1.0.h.

#define ActuatorsDefaultInit ( )    ActuatorsPwmInit()

Definition at line 165 of file lisa_l_1.0.h.

#define ADC_CHANNEL_VSUPPLY   2

Definition at line 148 of file lisa_l_1.0.h.

#define AHB_CLK   72000000

Definition at line 8 of file lisa_l_1.0.h.

#define BOARD_ADC_CHANNEL_1   8

Definition at line 152 of file lisa_l_1.0.h.

#define BOARD_ADC_CHANNEL_2   9

Definition at line 153 of file lisa_l_1.0.h.

#define BOARD_ADC_CHANNEL_3   0

Definition at line 156 of file lisa_l_1.0.h.

#define BOARD_ADC_CHANNEL_4   15

Definition at line 157 of file lisa_l_1.0.h.

#define BOARD_HAS_BARO   1

Definition at line 159 of file lisa_l_1.0.h.

#define BOARD_LISA_L

Definition at line 4 of file lisa_l_1.0.h.

#define DEFAULT_ACTUATORS   "subsystems/actuators/actuators_pwm.h"

Definition at line 163 of file lisa_l_1.0.h.

#define DefaultVoltageOfAdc (   adc)    (0.0059*adc)

Definition at line 150 of file lisa_l_1.0.h.

#define EXT_CLK   8000000

Definition at line 7 of file lisa_l_1.0.h.

#define I2C1_GPIO_PORT   GPIOB

Definition at line 46 of file lisa_l_1.0.h.

#define I2C1_GPIO_SCL   GPIO6

Definition at line 47 of file lisa_l_1.0.h.

#define I2C1_GPIO_SDA   GPIO7

Definition at line 48 of file lisa_l_1.0.h.

#define I2C2_GPIO_PORT   GPIOB

Definition at line 50 of file lisa_l_1.0.h.

#define I2C2_GPIO_SCL   GPIO10

Definition at line 51 of file lisa_l_1.0.h.

#define I2C2_GPIO_SDA   GPIO11

Definition at line 52 of file lisa_l_1.0.h.

#define LED_STP08

Definition at line 14 of file lisa_l_1.0.h.

#define POWER_SWITCH_LED   5

Definition at line 17 of file lisa_l_1.0.h.

#define PPM_CC_IE   TIM_DIER_CC2IE

Definition at line 128 of file lisa_l_1.0.h.

#define PPM_CC_IF   TIM_SR_CC2IF

Definition at line 129 of file lisa_l_1.0.h.

#define PPM_CHANNEL   TIM_IC2

Definition at line 124 of file lisa_l_1.0.h.

#define PPM_GPIO_AF   0

Definition at line 132 of file lisa_l_1.0.h.

#define PPM_GPIO_PIN   GPIO1

Definition at line 131 of file lisa_l_1.0.h.

#define PPM_GPIO_PORT   GPIOA

Definition at line 130 of file lisa_l_1.0.h.

#define PPM_IRQ   NVIC_TIM2_IRQ

Definition at line 126 of file lisa_l_1.0.h.

#define PPM_TIMER_INPUT   TIM_IC_IN_TI2

Definition at line 125 of file lisa_l_1.0.h.

#define PWM_SERVO_1   0

Definition at line 186 of file lisa_l_1.0.h.

#define PWM_SERVO_1_AF   0

Definition at line 191 of file lisa_l_1.0.h.

#define PWM_SERVO_1_GPIO   GPIOC

Definition at line 189 of file lisa_l_1.0.h.

#define PWM_SERVO_1_OC   TIM_OC1

Definition at line 192 of file lisa_l_1.0.h.

#define PWM_SERVO_1_OC_BIT   (1<<0)

Definition at line 193 of file lisa_l_1.0.h.

#define PWM_SERVO_1_PIN   GPIO6

Definition at line 190 of file lisa_l_1.0.h.

#define PWM_SERVO_1_RCC_IOP   RCC_APB2ENR_IOPCEN

Definition at line 188 of file lisa_l_1.0.h.

#define PWM_SERVO_1_TIMER   TIM3

Definition at line 187 of file lisa_l_1.0.h.

#define PWM_SERVO_2   1

Definition at line 199 of file lisa_l_1.0.h.

#define PWM_SERVO_2_AF   0

Definition at line 204 of file lisa_l_1.0.h.

#define PWM_SERVO_2_GPIO   GPIOC

Definition at line 202 of file lisa_l_1.0.h.

#define PWM_SERVO_2_OC   TIM_OC2

Definition at line 205 of file lisa_l_1.0.h.

#define PWM_SERVO_2_OC_BIT   (1<<1)

Definition at line 206 of file lisa_l_1.0.h.

#define PWM_SERVO_2_PIN   GPIO7

Definition at line 203 of file lisa_l_1.0.h.

#define PWM_SERVO_2_RCC_IOP   RCC_APB2ENR_IOPCEN

Definition at line 201 of file lisa_l_1.0.h.

#define PWM_SERVO_2_TIMER   TIM3

Definition at line 200 of file lisa_l_1.0.h.

#define PWM_SERVO_3   2

Definition at line 212 of file lisa_l_1.0.h.

Referenced by actuators_pwm_commit().

#define PWM_SERVO_3_AF   0

Definition at line 217 of file lisa_l_1.0.h.

#define PWM_SERVO_3_GPIO   GPIOC

Definition at line 215 of file lisa_l_1.0.h.

#define PWM_SERVO_3_OC   TIM_OC3

Definition at line 218 of file lisa_l_1.0.h.

#define PWM_SERVO_3_OC_BIT   (1<<2)

Definition at line 219 of file lisa_l_1.0.h.

#define PWM_SERVO_3_PIN   GPIO8

Definition at line 216 of file lisa_l_1.0.h.

#define PWM_SERVO_3_RCC_IOP   RCC_APB2ENR_IOPCEN

Definition at line 214 of file lisa_l_1.0.h.

#define PWM_SERVO_3_TIMER   TIM3

Definition at line 213 of file lisa_l_1.0.h.

#define PWM_SERVO_4   3

Definition at line 225 of file lisa_l_1.0.h.

#define PWM_SERVO_4_AF   0

Definition at line 230 of file lisa_l_1.0.h.

#define PWM_SERVO_4_GPIO   GPIOC

Definition at line 228 of file lisa_l_1.0.h.

#define PWM_SERVO_4_OC   TIM_OC4

Definition at line 231 of file lisa_l_1.0.h.

#define PWM_SERVO_4_OC_BIT   (1<<3)

Definition at line 232 of file lisa_l_1.0.h.

#define PWM_SERVO_4_PIN   GPIO9

Definition at line 229 of file lisa_l_1.0.h.

#define PWM_SERVO_4_RCC_IOP   RCC_APB2ENR_IOPCEN

Definition at line 227 of file lisa_l_1.0.h.

#define PWM_SERVO_4_TIMER   TIM3

Definition at line 226 of file lisa_l_1.0.h.

#define PWM_SERVO_5   4

Definition at line 238 of file lisa_l_1.0.h.

#define PWM_SERVO_5_AF   0

Definition at line 243 of file lisa_l_1.0.h.

#define PWM_SERVO_5_GPIO   GPIOB

Definition at line 241 of file lisa_l_1.0.h.

#define PWM_SERVO_5_OC   TIM_OC3

Definition at line 244 of file lisa_l_1.0.h.

#define PWM_SERVO_5_OC_BIT   (1<<2)

Definition at line 245 of file lisa_l_1.0.h.

#define PWM_SERVO_5_PIN   GPIO8

Definition at line 242 of file lisa_l_1.0.h.

#define PWM_SERVO_5_RCC_IOP   RCC_APB2ENR_IOPBEN

Definition at line 240 of file lisa_l_1.0.h.

#define PWM_SERVO_5_TIMER   TIM4

Definition at line 239 of file lisa_l_1.0.h.

#define PWM_SERVO_6   5

Definition at line 251 of file lisa_l_1.0.h.

#define PWM_SERVO_6_AF   0

Definition at line 256 of file lisa_l_1.0.h.

#define PWM_SERVO_6_GPIO   GPIOB

Definition at line 254 of file lisa_l_1.0.h.

#define PWM_SERVO_6_OC   TIM_OC4

Definition at line 257 of file lisa_l_1.0.h.

#define PWM_SERVO_6_OC_BIT   (1<<3)

Definition at line 258 of file lisa_l_1.0.h.

#define PWM_SERVO_6_PIN   GPIO9

Definition at line 255 of file lisa_l_1.0.h.

#define PWM_SERVO_6_RCC_IOP   RCC_APB2ENR_IOPBEN

Definition at line 253 of file lisa_l_1.0.h.

#define PWM_SERVO_6_TIMER   TIM4

Definition at line 252 of file lisa_l_1.0.h.

Definition at line 264 of file lisa_l_1.0.h.

#define PWM_TIM4_CHAN_MASK   (PWM_SERVO_5_OC_BIT|PWM_SERVO_6_OC_BIT)

Definition at line 266 of file lisa_l_1.0.h.

#define PWM_USE_TIM3   1

Definition at line 172 of file lisa_l_1.0.h.

#define PWM_USE_TIM4   1

Definition at line 173 of file lisa_l_1.0.h.

#define SPEKTRUM_BIND_PIN   GPIO3

Definition at line 89 of file lisa_l_1.0.h.

#define SPEKTRUM_BIND_PIN_PORT   GPIOC

Definition at line 90 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_AF   0

Definition at line 96 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_BANK   GPIO_BANK_USART1_RX

Definition at line 94 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_DEV   USART1

Definition at line 99 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_IRQ   NVIC_USART1_IRQ

Definition at line 97 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_ISR   usart1_isr

Definition at line 98 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_PIN   GPIO_USART1_RX

Definition at line 95 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_RCC_DEV   RCC_APB2ENR_USART1EN

Definition at line 93 of file lisa_l_1.0.h.

#define SPEKTRUM_UART1_RCC_REG   &RCC_APB2ENR

Definition at line 92 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_AF   AFIO_MAPR_USART3_REMAP_PARTIAL_REMAP

Definition at line 105 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_BANK   GPIO_BANK_USART3_PR_RX

Definition at line 103 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_DEV   USART3

Definition at line 108 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_IRQ   NVIC_USART3_IRQ

Definition at line 106 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_ISR   usart3_isr

Definition at line 107 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_PIN   GPIO_USART3_PR_RX

Definition at line 104 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_RCC_DEV   RCC_APB1ENR_USART3EN

Definition at line 102 of file lisa_l_1.0.h.

#define SPEKTRUM_UART3_RCC_REG   &RCC_APB1ENR

Definition at line 101 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_AF   0

Definition at line 114 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_BANK   GPIO_BANK_UART5_RX

Definition at line 112 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_DEV   UART5

Definition at line 117 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_IRQ   NVIC_UART5_IRQ

Definition at line 115 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_ISR   uart5_isr

Definition at line 116 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_PIN   GPIO_UART5_RX

Definition at line 113 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_RCC_DEV   RCC_APB1ENR_UART5EN

Definition at line 111 of file lisa_l_1.0.h.

#define SPEKTRUM_UART5_RCC_REG   &RCC_APB1ENR

Definition at line 110 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE0_PERIPH   RCC_APB2ENR_IOPAEN

Definition at line 21 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE0_PIN   GPIO15

Definition at line 23 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE0_PORT   GPIOA

Definition at line 22 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE1_PERIPH   RCC_APB2ENR_IOPAEN

Definition at line 25 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE1_PIN   GPIO4

Definition at line 27 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE1_PORT   GPIOA

Definition at line 26 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE2_PERIPH   RCC_APB2ENR_IOPBEN

Definition at line 29 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE2_PIN   GPIO12

Definition at line 31 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE2_PORT   GPIOB

Definition at line 30 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE3_PERIPH   RCC_APB2ENR_IOPCEN

Definition at line 33 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE3_PIN   GPIO13

Definition at line 35 of file lisa_l_1.0.h.

Referenced by spi_init_slaves(), SpiSlaveSelect(), and SpiSlaveUnselect().

#define SPI_SELECT_SLAVE3_PORT   GPIOC

Definition at line 34 of file lisa_l_1.0.h.

Referenced by spi_init_slaves(), SpiSlaveSelect(), and SpiSlaveUnselect().

#define SPI_SELECT_SLAVE4_PERIPH   RCC_APB2ENR_IOPCEN

Definition at line 37 of file lisa_l_1.0.h.

#define SPI_SELECT_SLAVE4_PIN   GPIO12

Definition at line 39 of file lisa_l_1.0.h.

Referenced by spi_init_slaves(), SpiSlaveSelect(), and SpiSlaveUnselect().

#define SPI_SELECT_SLAVE4_PORT   GPIOC

Definition at line 38 of file lisa_l_1.0.h.

Referenced by spi_init_slaves(), SpiSlaveSelect(), and SpiSlaveUnselect().

#define UART1_GPIO_AF   0

Definition at line 60 of file lisa_l_1.0.h.

#define UART1_GPIO_PORT_RX   GPIO_BANK_USART1_RX

Definition at line 61 of file lisa_l_1.0.h.

#define UART1_GPIO_PORT_TX   GPIO_BANK_USART1_TX

Definition at line 63 of file lisa_l_1.0.h.

#define UART1_GPIO_RX   GPIO_USART1_RX

Definition at line 62 of file lisa_l_1.0.h.

#define UART1_GPIO_TX   GPIO_USART1_TX

Definition at line 64 of file lisa_l_1.0.h.

#define UART2_GPIO_AF   0

Definition at line 66 of file lisa_l_1.0.h.

#define UART2_GPIO_PORT_RX   GPIO_BANK_USART2_RX

Definition at line 67 of file lisa_l_1.0.h.

#define UART2_GPIO_PORT_TX   GPIO_BANK_USART2_TX

Definition at line 69 of file lisa_l_1.0.h.

#define UART2_GPIO_RX   GPIO_USART2_RX

Definition at line 68 of file lisa_l_1.0.h.

#define UART2_GPIO_TX   GPIO_USART2_TX

Definition at line 70 of file lisa_l_1.0.h.

#define UART3_GPIO_AF   AFIO_MAPR_USART3_REMAP_PARTIAL_REMAP

Definition at line 72 of file lisa_l_1.0.h.

#define UART3_GPIO_PORT_RX   GPIO_BANK_USART3_PR_RX

Definition at line 73 of file lisa_l_1.0.h.

#define UART3_GPIO_PORT_TX   GPIO_BANK_USART3_PR_TX

Definition at line 75 of file lisa_l_1.0.h.

#define UART3_GPIO_RX   GPIO_USART3_PR_RX

Definition at line 74 of file lisa_l_1.0.h.

#define UART3_GPIO_TX   GPIO_USART3_PR_TX

Definition at line 76 of file lisa_l_1.0.h.

#define UART5_GPIO_AF   0

Definition at line 78 of file lisa_l_1.0.h.

#define UART5_GPIO_PORT_RX   GPIO_BANK_UART5_RX

Definition at line 79 of file lisa_l_1.0.h.

#define UART5_GPIO_PORT_TX   GPIO_BANK_UART5_TX

Definition at line 81 of file lisa_l_1.0.h.

#define UART5_GPIO_RX   GPIO_UART5_RX

Definition at line 80 of file lisa_l_1.0.h.

#define UART5_GPIO_TX   GPIO_UART5_TX

Definition at line 82 of file lisa_l_1.0.h.

#define USE_AD1   1

Definition at line 137 of file lisa_l_1.0.h.

#define USE_AD1_1   1

Definition at line 138 of file lisa_l_1.0.h.

Referenced by adc_init().

#define USE_AD1_2   1

Definition at line 139 of file lisa_l_1.0.h.

#define USE_AD1_3   1

Definition at line 140 of file lisa_l_1.0.h.

Referenced by adc_init().

#define USE_AD1_4   1

Definition at line 141 of file lisa_l_1.0.h.

#define USE_AD_TIM1   1

Definition at line 143 of file lisa_l_1.0.h.

#define USE_LED_1   1

Definition at line 12 of file lisa_l_1.0.h.

#define USE_PPM_TIM2   1

Definition at line 123 of file lisa_l_1.0.h.

#define USE_PWM1   1

Definition at line 175 of file lisa_l_1.0.h.

#define USE_PWM2   1

Definition at line 176 of file lisa_l_1.0.h.

#define USE_PWM3   1

Definition at line 177 of file lisa_l_1.0.h.

#define USE_PWM4   1

Definition at line 178 of file lisa_l_1.0.h.

#define USE_PWM5   1

Definition at line 179 of file lisa_l_1.0.h.

#define USE_PWM6   1

Definition at line 180 of file lisa_l_1.0.h.